Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/include/linux/Makefile.in

589 lines
18 KiB
Makefile
Raw Normal View History

Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = include/linux
DIST_COMMON = $(am__kernel_HEADERS_DIST) $(libzfs_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
Always check -Wno-unused-but-set-variable gcc support The previous commit 8a7e1ceefa430988c8f888ca708ab307333b4464 wasn't quite right. This check applies to both the user and kernel space build and as such we must make sure it runs regardless of what the --with-config option is set too. For example, if --with-config=kernel then the autoconf test does not run and we generate build warnings when compiling the kernel packages.
2011-06-14 22:09:05 +00:00
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
Fix 'zfs set volsize=N pool/dataset' This change fixes a kernel panic which would occur when resizing a dataset which was not open. The objset_t stored in the zvol_state_t will be set to NULL when the block device is closed. To avoid this issue we pass the correct objset_t as the third arg. The code has also been updated to correctly notify the kernel when the block device capacity changes. For 2.6.28 and newer kernels the capacity change will be immediately detected. For earlier kernels the capacity change will be detected when the device is next opened. This is a known limitation of older kernels. Online ext3 resize test case passes on 2.6.28+ kernels: $ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023 $ zpool create tank /tmp/zvol $ zfs create -V 500M tank/zd0 $ mkfs.ext3 /dev/zd0 $ mkdir /mnt/zd0 $ mount /dev/zd0 /mnt/zd0 $ df -h /mnt/zd0 $ zfs set volsize=800M tank/zd0 $ resize2fs /dev/zd0 $ df -h /mnt/zd0 Original-patch-by: Fajar A. Nugraha <github@fajar.net> Closes #68 Closes #84
2011-02-25 07:36:01 +00:00
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
Implemented NFS export_operations. Implemented the required NFS operations for exporting ZFS datasets using the in-kernel NFS daemon.
2011-04-28 16:35:50 +00:00
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
Linux 2.6.36 compat, sops->evict_inode() The new prefered inteface for evicting an inode from the inode cache is the ->evict_inode() callback. It replaces both the ->delete_inode() and ->clear_inode() callbacks which were previously used for this.
2011-02-11 21:46:10 +00:00
$(top_srcdir)/config/kernel-evict-inode.m4 \
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
$(top_srcdir)/config/kernel-fmode-t.m4 \
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
$(top_srcdir)/config/kernel-fsync.m4 \
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
Linux 2.6.28 compat, insert_inode_locked() Added insert_inode_locked() helper function, prior to this most callers used insert_inode_hash(). The older method doesn't check for collisions in the inode_hashtable but it still acceptible for use. Fallback to using insert_inode_hash() when insert_inode_locked() is unavailable.
2011-03-22 16:55:09 +00:00
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 18:44:07 +00:00
$(top_srcdir)/config/kernel-mount-nodev.m4 \
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
$(top_srcdir)/config/kernel-security-inode-init.m4 \
Tear down and flush the mmap region The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com> Closes #255
2011-06-25 12:30:29 +00:00
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
Linux 2.6.35 compat, const struct xattr_handler The const keyword was added to the 'struct xattr_handler' in the generic Linux super_block structure. To handle this we define an appropriate xattr_handler_t typedef which can be used. This was the preferred solution because it keeps the code clean and readable.
2011-02-11 00:16:52 +00:00
$(top_srcdir)/config/kernel-xattr-handler.m4 \
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
am__kernel_HEADERS_DIST = $(top_srcdir)/include/linux/dcache_compat.h \
$(top_srcdir)/include/linux/xattr_compat.h \
Add the new blkdev_compat.h header to the DIST target. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-02-24 17:08:35 +00:00
$(top_srcdir)/include/linux/vfs_compat.h \
$(top_srcdir)/include/linux/blkdev_compat.h
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(libzfsdir)"
HEADERS = $(kernel_HEADERS) $(libzfs_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
Provide a rc.d script for archlinux Unlike most other Linux distributions archlinux installs its init scripts in /etc/rc.d insead of /etc/init.d. This commit provides an archlinux rc.d script for zfs and extends the build infrastructure to ensure it get's installed in the correct place. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #322
2011-07-10 15:57:33 +00:00
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
Add init scripts To support automatically mounting your zfs on filesystem on boot a basic init script is needed. Unfortunately, every distribution has their own idea of the _right_ way to do things. Rather than write one very complicated portable init script, which would be invariably replaced by the distributions own anyway. I have instead added support to provide multiple distribution specific init scripts. The correct init script for your distribution will be selected by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT. During 'make install' the correct script for your system will be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the usual /etc/init.d/zfs location. Currently, there is zfs.fedora and a more generic zfs.lsb init script. Hopefully, the distribution maintainers who know best how they want their init scripts to function will feedback their approved versions to be included in the project. This change does not consider upstart jobs but I'm not at all opposed to add that sort of thing.
2011-03-17 22:02:28 +00:00
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
Check for -Wno-unused-but-set-variable gcc support Gcc versions 4.3.2 and earlier do not support the compiler flag -Wno-unused-but-set-variable. This can lead to build failures on older Linux platforms such as Debian Lenny. Since this is an optional build argument this changes add a new autoconf check for the option. If it is supported by the installed version of gcc then it is used otherwise it is omited. See commit's 12c1acde76683108441827ae9affba1872f3afe5 and 79713039a2b6e0ed223d141b4a8a8455f282d2f2 for the reason the -Wno-unused-but-set-variable options was originally added.
2011-06-14 18:02:13 +00:00
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
COMMON_H =
KERNEL_H = \
Linux 2.6.35 compat, fops->fsync() The fsync() callback in the file_operations structure used to take 3 arguments. The callback now only takes 2 arguments because the dentry argument was determined to be unused by all consumers. To handle this a compatibility prototype was added to ensure the right prototype is used. Our implementation never used the dentry argument either so it's just a matter of using the right prototype.
2011-02-11 16:58:55 +00:00
$(top_srcdir)/include/linux/dcache_compat.h \
$(top_srcdir)/include/linux/xattr_compat.h \
Add xvattr support With the removal of the minimal xvattr support from the spl this support needs to be replaced in the zfs package. This is fairly easily accomplished by directly adding portions of the sys/vnode.h header from OpenSolaris. These xvattr additions have been placed in the sys/xvattr.h header file and included as needed where simply a sys/vnode.h was included before. In additon to the xvattr types and helper macros two functions were also included. The xva_init() and xva_getxoptattr() functions were included as static inline functions in xvattr.h. They are simple enough and it was simpler to place them here rather than in their own .c file.
2011-03-02 00:24:39 +00:00
$(top_srcdir)/include/linux/vfs_compat.h \
$(top_srcdir)/include/linux/blkdev_compat.h
Add Linux Compat Infrastructure Lay the initial ground work for a include/linux/ compatibility directory. This was less critical in the past because the bulk of the ZFS code consumes the Solaris API via the SPL. This API was stable and the bulk Linux API differences were handled in the SPL. However, with the addition of a full Posix layer written directly against the Linux APIs we are going to need more compatibility code. It makes sense that all this code should be cleanly located in one place. Subsequent patches should move the existing zvol and vdev_disk compatibility code in to this directory.
2011-01-18 19:42:25 +00:00
USER_H =
EXTRA_DIST = $(COMMON_H) $(KERNEL_H) $(USER_H)
@CONFIG_USER_TRUE@libzfsdir = $(includedir)/libzfs/linux
@CONFIG_USER_TRUE@libzfs_HEADERS = $(COMMON_H) $(USER_H)
@CONFIG_KERNEL_TRUE@kerneldir = /usr/src/zfs-$(ZFS_META_VERSION)/$(LINUX_VERSION)/linux
@CONFIG_KERNEL_TRUE@kernel_HEADERS = $(COMMON_H) $(KERNEL_H)
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/linux/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu include/linux/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-kernelHEADERS: $(kernel_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
@list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
done
uninstall-kernelHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(kerneldir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(kerneldir)" && rm -f $$files
install-libzfsHEADERS: $(libzfs_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(libzfsdir)" || $(MKDIR_P) "$(DESTDIR)$(libzfsdir)"
@list='$(libzfs_HEADERS)'; test -n "$(libzfsdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libzfsdir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(libzfsdir)" || exit $$?; \
done
uninstall-libzfsHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(libzfs_HEADERS)'; test -n "$(libzfsdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(libzfsdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(libzfsdir)" && rm -f $$files
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(HEADERS)
installdirs:
for dir in "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(libzfsdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-kernelHEADERS install-libzfsHEADERS
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-kernelHEADERS uninstall-libzfsHEADERS
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-libtool ctags distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-kernelHEADERS install-libzfsHEADERS \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags uninstall uninstall-am uninstall-kernelHEADERS \
uninstall-libzfsHEADERS
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: