Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/config/kernel-dentry-operations.m4

195 lines
4.7 KiB
Plaintext
Raw Normal View History

Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
dnl #
dnl # 3.4.0 API change
dnl # Added d_make_root() to replace previous d_alloc_root() function.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_D_MAKE_ROOT], [
ZFS_LINUX_TEST_SRC([d_make_root], [
#include <linux/dcache.h>
], [
d_make_root(NULL);
])
])
AC_DEFUN([ZFS_AC_KERNEL_D_MAKE_ROOT], [
AC_MSG_CHECKING([whether d_make_root() is available])
ZFS_LINUX_TEST_RESULT_SYMBOL([d_make_root],
[d_make_root], [fs/dcache.c], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_D_MAKE_ROOT, 1, [d_make_root() is available])
], [
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 2.6.28 API change
dnl # Added d_obtain_alias() helper function.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_D_OBTAIN_ALIAS], [
ZFS_LINUX_TEST_SRC([d_obtain_alias], [
#include <linux/dcache.h>
], [
d_obtain_alias(NULL);
])
])
AC_DEFUN([ZFS_AC_KERNEL_D_OBTAIN_ALIAS], [
AC_MSG_CHECKING([whether d_obtain_alias() is available])
ZFS_LINUX_TEST_RESULT_SYMBOL([d_obtain_alias],
[d_obtain_alias], [fs/dcache.c], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_D_OBTAIN_ALIAS, 1,
[d_obtain_alias() is available])
], [
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 2.6.12 API change
dnl # d_prune_aliases() helper function available.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_D_PRUNE_ALIASES], [
ZFS_LINUX_TEST_SRC([d_prune_aliases], [
#include <linux/dcache.h>
], [
struct inode *ip = NULL;
d_prune_aliases(ip);
])
])
AC_DEFUN([ZFS_AC_KERNEL_D_PRUNE_ALIASES], [
AC_MSG_CHECKING([whether d_prune_aliases() is available])
ZFS_LINUX_TEST_RESULT_SYMBOL([d_prune_aliases],
[d_prune_aliases], [fs/dcache.c], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_D_PRUNE_ALIASES, 1,
[d_prune_aliases() is available])
], [
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 2.6.38 API change
dnl # Added d_set_d_op() helper function.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_SRC_D_SET_D_OP], [
ZFS_LINUX_TEST_SRC([d_set_d_op], [
#include <linux/dcache.h>
], [
d_set_d_op(NULL, NULL);
])
])
AC_DEFUN([ZFS_AC_KERNEL_D_SET_D_OP], [
AC_MSG_CHECKING([whether d_set_d_op() is available])
ZFS_LINUX_TEST_RESULT_SYMBOL([d_set_d_op],
[d_set_d_op], [fs/dcache.c], [
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_D_SET_D_OP, 1, [d_set_d_op() is available])
], [
AC_MSG_RESULT(no)
])
])
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
dnl #
dnl # 3.6 API change
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_D_REVALIDATE_NAMEIDATA], [
ZFS_LINUX_TEST_SRC([dentry_operations_revalidate], [
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
#include <linux/dcache.h>
Fix config issues: frame size and headers 1. With various (debug and/or tracing?) kernel options enabled it's possible for 'struct inode' and 'struct super_block' to exceed the default frame size, leaving errors like this in config.log: build/conftest.c:116:1: error: the frame size of 1048 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Fix this by removing the frame size warning for config checks 2. Without the correct headers included, it's possible for declarations to be missed, leaving errors like this in the config.log: build/conftest.c:131:14: error: ‘struct nameidata’ declared inside parameter list [-Werror] Fix this by adding appropriate headers. Note: Both these issues can result in silent config failures because the compile failure is taken to mean "this option is not supported by this kernel" rather than "there's something wrong with the config test". This can lead to something merely annoying (compile failures) to something potentially serious (miscompiled or misused kernel primitives or functions). E.g. the fixes included here resulted in these additional defines in zfs_config.h with linux v4.14.19: Also, drive-by whitespace fixes in config/* files which don't mention "GNU" (those ones look to be imported from elsewhere so leave them alone). Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlop <chris@onthe.net.au> Closes #7169
2018-02-15 20:58:23 +00:00
#include <linux/sched.h>
Eliminate runtime function pointer mods in autotools checks PaX/GrSecurity patched kernels implement a dialect of C that relies on a GCC plugin for enforcement. A basic idea in this dialect is that function pointers in structures should not change during runtime. This causes code that modifies function pointers at runtime to fail to compile in many instances. The autotools checks rely on whether or not small test cases compile against a given kernel. Some autotools checks assume some default case if other cases fail. When one of these autotools checks tests a PaX/GrSecurity patched kernel by modifying a function pointer at runtime, the default case will be used. Early detection of such situations is possible by relying on compiler warnings, which are compiler errors when --enable-debug is used. Unfortunately, very few people build ZFS with --enable-debug. The more common situation is that these issues manifest themselves as runtime failures in the form of NULL pointer exceptions. Previous patches that addressed such issues with PaX/GrSecurity compatibility largely relied on rewriting autotools checks to avoid runtime function pointer modification or the addition of PaX/GrSecurity specific checks. This patch takes the previous work to its logical conclusion by eliminating the use of runtime function pointer modification. This permits the removal of PaX-specific autotools checks in favor of ones that work across all supported kernels. This should resolve issues that were reported to occur with PaX/GrSecurity-patched Linux 3.7.5 kernels on Gentoo Linux. https://bugs.gentoo.org/show_bug.cgi?id=457176 We should be able to prevent future regressions in PaX/GrSecurity compatibility by ensuring that all changes to ZFSOnLinux avoid runtime function pointer modification. At the same time, this does not solve the issue of silent failures triggering default cases in the autotools check, which is what permitted these regressions to become runtime failures in the first place. This will need to be addressed in a future patch. Reported-by: Marcin Mirosław <bug@mejor.pl> Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1300
2013-02-14 23:54:04 +00:00
int revalidate (struct dentry *dentry,
struct nameidata *nidata) { return 0; }
static const struct dentry_operations
dops __attribute__ ((unused)) = {
.d_revalidate = revalidate,
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
};
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
],[])
])
AC_DEFUN([ZFS_AC_KERNEL_D_REVALIDATE_NAMEIDATA], [
AC_MSG_CHECKING([whether dops->d_revalidate() takes struct nameidata])
ZFS_LINUX_TEST_RESULT([dentry_operations_revalidate], [
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_D_REVALIDATE_NAMEIDATA, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
[dops->d_revalidate() operation takes nameidata])
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
],[
AC_MSG_RESULT(no)
])
])
dnl #
dnl # 2.6.30 API change
dnl # The 'struct dentry_operations' was constified in the dentry structure.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_CONST_DENTRY_OPERATIONS], [
ZFS_LINUX_TEST_SRC([dentry_operations_const], [
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
#include <linux/dcache.h>
const struct dentry_operations test_d_op = {
.d_revalidate = NULL,
};
],[
struct dentry d __attribute__ ((unused));
d.d_op = &test_d_op;
])
])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_CONST_DENTRY_OPERATIONS], [
AC_MSG_CHECKING([whether dentry uses const struct dentry_operations])
ZFS_LINUX_TEST_RESULT([dentry_operations_const], [
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
AC_MSG_RESULT(yes)
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
AC_DEFINE(HAVE_CONST_DENTRY_OPERATIONS, 1,
[dentry uses const struct dentry_operations])
],[
Fix false ENOENT on snapshot control dentries Lookups in the snapshot control directory for an existing snapshot fail with ENOENT if an earlier lookup failed before the snapshot was created. This is because the earlier lookup causes a negative dentry to be cached which is never invalidated. The bug can be reproduced as follows (the second ls should succeed): $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory $ zfs snap tank@s $ ls /tank/.zfs/snapshot/s ls: cannot access /tank/.zfs/snapshot/s: No such file or directory To remedy this, always invalidate cached dentries in the snapshot control directory. Since these entries never exist on disk there is no significant performance penalty for the extra lookups. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1192
2013-01-14 21:59:14 +00:00
AC_MSG_RESULT(no)
])
])
Use sb->s_d_op default dentry operations As of Linux 2.6.37 the right way to register custom dentry operations is to use the super block's ->s_d_op field. For older kernels they should be registered as part of the lookup operation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1223
2013-01-18 22:11:40 +00:00
dnl #
Fix typos in config/ Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Closes #9232
2019-08-30 16:40:30 +00:00
dnl # 2.6.38 API change
Use sb->s_d_op default dentry operations As of Linux 2.6.37 the right way to register custom dentry operations is to use the super block's ->s_d_op field. For older kernels they should be registered as part of the lookup operation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1223
2013-01-18 22:11:40 +00:00
dnl # Added sb->s_d_op default dentry_operations member
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_S_D_OP], [
ZFS_LINUX_TEST_SRC([super_block_s_d_op], [
Use sb->s_d_op default dentry operations As of Linux 2.6.37 the right way to register custom dentry operations is to use the super block's ->s_d_op field. For older kernels they should be registered as part of the lookup operation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1223
2013-01-18 22:11:40 +00:00
#include <linux/fs.h>
],[
struct super_block sb __attribute__ ((unused));
sb.s_d_op = NULL;
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
])
])
AC_DEFUN([ZFS_AC_KERNEL_S_D_OP], [
AC_MSG_CHECKING([whether super_block has s_d_op])
ZFS_LINUX_TEST_RESULT([super_block_s_d_op], [
Use sb->s_d_op default dentry operations As of Linux 2.6.37 the right way to register custom dentry operations is to use the super block's ->s_d_op field. For older kernels they should be registered as part of the lookup operation. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1223
2013-01-18 22:11:40 +00:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_S_D_OP, 1, [struct super_block has s_d_op])
], [
AC_MSG_RESULT(no)
])
])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_DENTRY], [
ZFS_AC_KERNEL_SRC_D_MAKE_ROOT
ZFS_AC_KERNEL_SRC_D_OBTAIN_ALIAS
ZFS_AC_KERNEL_SRC_D_PRUNE_ALIASES
ZFS_AC_KERNEL_SRC_D_SET_D_OP
ZFS_AC_KERNEL_SRC_D_REVALIDATE_NAMEIDATA
ZFS_AC_KERNEL_SRC_CONST_DENTRY_OPERATIONS
ZFS_AC_KERNEL_SRC_S_D_OP
])
AC_DEFUN([ZFS_AC_KERNEL_DENTRY], [
ZFS_AC_KERNEL_D_MAKE_ROOT
ZFS_AC_KERNEL_D_OBTAIN_ALIAS
ZFS_AC_KERNEL_D_PRUNE_ALIASES
ZFS_AC_KERNEL_D_SET_D_OP
ZFS_AC_KERNEL_D_REVALIDATE_NAMEIDATA
ZFS_AC_KERNEL_CONST_DENTRY_OPERATIONS
ZFS_AC_KERNEL_S_D_OP
])