Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/etc/systemd/system/zfs-import-scan.service.in

20 lines
479 B
SYSTEMD
Raw Normal View History

Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
[Unit]
Description=Import ZFS pools by device scanning
Add man page reference to systemd units Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Closes #6599
2017-09-05 20:50:35 +00:00
Documentation=man:zpool(8)
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
DefaultDependencies=no
Requires=systemd-udev-settle.service
After=systemd-udev-settle.service
Import zfs pools after cryptsetup The zfs-import-cache.service and zfs-import-scan.service should should be started after cryptsetup to ensure all LUKS devices have been opened. Signed-off-by: alteriks <alteriks@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1474
2014-07-26 16:45:15 +00:00
After=cryptsetup.target
Order zfs-import-*.service after multipathd If someone is using both multipathd and ZFS, they are probably using them together. Ordering the zpool imports after multipathd is ready fixes import issues for multipath configurations. Tested-by: Mike Pastore <mike@oobak.org> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com> Closes #9863
2020-01-22 20:45:25 +00:00
After=multipathd.target
systemd zfs-import.target and documentation zfs-import-{cache,scan}.service must complete before any mounting of filesystems can occur. To simplify this dependency, create a target that is reached After (in the systemd sense) the pool is imported. Additionally, recommend that legacy zfs mounts use the option x-systemd.requires=zfs-import.target to codify this requirement. Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com> Closes #6764
2017-10-30 20:18:26 +00:00
Before=zfs-import.target
zfs-import-{cache,scan}: change condition to FileNotEmpty When all pools are exported ZFS will generate an empty cache file. This will cause the import service to fail, which is sub-optimal, since this means that dracut fails, and it necessary to run `zpool import -a` to boot, delete the file, and regenerate+reinstall the initrd. This resolves the issue by treating an zero-length cache files the same as a missing cache file. This aligns the behavior with that of the `zpool` command itself. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #11568
2021-02-05 19:25:22 +00:00
ConditionFileNotEmpty=!@sysconfdir@/zfs/zpool.cache
Verify zfs module loaded before starting services This is a minor change to the systemd service templates that verifies the zfs kernel module is loaded by the kernel prior to attempting to import any zpool. The services check for the presence of /sys/module/zfs which indicates the zfs is module is loaded. This uses the systemd built-in check ConditionPathIsDirectory. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matthew Thode <prometheanfire@gentoo.org> Signed-off-by: Jonathon Fernyhough <jonathon.fernyhough@york.ac.uk> Closes #10663
2020-08-02 00:13:15 +00:00
ConditionPathIsDirectory=/sys/module/zfs
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
[Service]
Type=oneshot
RemainAfterExit=yes
Systemd configuration fixes * Disable zfs-import-scan.service by default. This ensures that pools will not be automatically imported unless they appear in the cache file. When this service is explicitly enabled pools will be imported with the "cachefile=none" property set. This prevents the creation of, or update to, an existing cache file. $ systemctl list-unit-files | grep zfs zfs-import-cache.service enabled zfs-import-scan.service disabled zfs-mount.service enabled zfs-share.service enabled zfs-zed.service enabled zfs.target enabled * Change services to dynamic from static by adding an [Install] section and adding 'WantedBy' tags in favor of 'Requires' tags. This allows for easier customization of the boot behavior. * Start the zfs-import-cache.service after the root pivot so the cache file is available in the standard location. * Start the zfs-mount.service after the systemd-remount-fs.service to ensure the root fs is writeable and the ZFS filesystems can create their mount points. * Change the default behavior to only load the ZFS kernel modules in zfs-import-*.service or when blkid(8) detects a pool. Users who wish to unconditionally load the kernel modules must uncomment the list of modules in /lib/modules-load.d/zfs.conf. Reviewed-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4325 Closes #4496 Closes #4658 Closes #4699
2016-05-25 17:48:12 +00:00
ExecStart=@sbindir@/zpool import -aN -o cachefile=none
[Install]
systemd zfs-import.target and documentation zfs-import-{cache,scan}.service must complete before any mounting of filesystems can occur. To simplify this dependency, create a target that is reached After (in the systemd sense) the pool is imported. Additionally, recommend that legacy zfs mounts use the option x-systemd.requires=zfs-import.target to codify this requirement. Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com> Closes #6764
2017-10-30 20:18:26 +00:00
WantedBy=zfs-import.target