zfs/module/spl/spl-kmem.c

565 lines
15 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
* For details, see <http://zfsonlinux.org/>.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
*/
#include <sys/debug.h>
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#include <sys/sysmacros.h>
#include <sys/kmem.h>
#include <sys/vmem.h>
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#include <linux/mm.h>
#include <linux/ratelimit.h>
/*
* As a general rule kmem_alloc() allocations should be small, preferably
* just a few pages since they must by physically contiguous. Therefore, a
* rate limited warning will be printed to the console for any kmem_alloc()
* which exceeds a reasonable threshold.
*
* The default warning threshold is set to sixteen pages but capped at 64K to
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
* accommodate systems using large pages. This value was selected to be small
* enough to ensure the largest allocations are quickly noticed and fixed.
* But large enough to avoid logging any warnings when a allocation size is
* larger than optimal but not a serious concern. Since this value is tunable,
* developers are encouraged to set it lower when testing so any new largish
* allocations are quickly caught. These warnings may be disabled by setting
* the threshold to zero.
*/
unsigned int spl_kmem_alloc_warn = MIN(16 * PAGE_SIZE, 64 * 1024);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
module_param(spl_kmem_alloc_warn, uint, 0644);
MODULE_PARM_DESC(spl_kmem_alloc_warn,
"Warning threshold in bytes for a kmem_alloc()");
EXPORT_SYMBOL(spl_kmem_alloc_warn);
/*
* Large kmem_alloc() allocations will fail if they exceed KMALLOC_MAX_SIZE.
* Allocations which are marginally smaller than this limit may succeed but
* should still be avoided due to the expense of locating a contiguous range
* of free pages. Therefore, a maximum kmem size with reasonable safely
* margin of 4x is set. Kmem_alloc() allocations larger than this maximum
* will quickly fail. Vmem_alloc() allocations less than or equal to this
* value will use kmalloc(), but shift to vmalloc() when exceeding this value.
*/
unsigned int spl_kmem_alloc_max = (KMALLOC_MAX_SIZE >> 2);
module_param(spl_kmem_alloc_max, uint, 0644);
MODULE_PARM_DESC(spl_kmem_alloc_max,
"Maximum size in bytes for a kmem_alloc()");
EXPORT_SYMBOL(spl_kmem_alloc_max);
int
kmem_debugging(void)
{
return (0);
}
EXPORT_SYMBOL(kmem_debugging);
char *
kmem_vasprintf(const char *fmt, va_list ap)
{
va_list aq;
char *ptr;
do {
va_copy(aq, ap);
ptr = kvasprintf(kmem_flags_convert(KM_SLEEP), fmt, aq);
va_end(aq);
} while (ptr == NULL);
return (ptr);
}
EXPORT_SYMBOL(kmem_vasprintf);
char *
kmem_asprintf(const char *fmt, ...)
{
va_list ap;
char *ptr;
do {
va_start(ap, fmt);
ptr = kvasprintf(kmem_flags_convert(KM_SLEEP), fmt, ap);
va_end(ap);
} while (ptr == NULL);
return (ptr);
}
EXPORT_SYMBOL(kmem_asprintf);
static char *
__strdup(const char *str, int flags)
{
char *ptr;
int n;
n = strlen(str);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
ptr = kmalloc(n + 1, kmem_flags_convert(flags));
if (ptr)
memcpy(ptr, str, n + 1);
return (ptr);
}
char *
strdup(const char *str)
{
return (__strdup(str, KM_SLEEP));
}
EXPORT_SYMBOL(strdup);
void
strfree(char *str)
{
kfree(str);
}
EXPORT_SYMBOL(strfree);
/*
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
* Limit the number of large allocation stack traces dumped to not more than
* 5 every 60 seconds to prevent denial-of-service attacks from debug code.
*/
DEFINE_RATELIMIT_STATE(kmem_alloc_ratelimit_state, 60 * HZ, 5);
/*
* General purpose unified implementation of kmem_alloc(). It is an
* amalgamation of Linux and Illumos allocator design. It should never be
* exported to ensure that code using kmem_alloc()/kmem_zalloc() remains
* relatively portable. Consumers may only access this function through
* wrappers that enforce the common flags to ensure portability.
*/
inline void *
spl_kmem_alloc_impl(size_t size, int flags, int node)
{
gfp_t lflags = kmem_flags_convert(flags);
int use_vmem = 0;
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
void *ptr;
/*
* Log abnormally large allocations and rate limit the console output.
* Allocations larger than spl_kmem_alloc_warn should be performed
* through the vmem_alloc()/vmem_zalloc() interfaces.
*/
if ((spl_kmem_alloc_warn > 0) && (size > spl_kmem_alloc_warn) &&
!(flags & KM_VMEM) && __ratelimit(&kmem_alloc_ratelimit_state)) {
printk(KERN_WARNING
"Large kmem_alloc(%lu, 0x%x), please file an issue at:\n"
"https://github.com/zfsonlinux/zfs/issues/new\n",
(unsigned long)size, flags);
dump_stack();
}
/*
* Use a loop because kmalloc_node() can fail when GFP_KERNEL is used
* unlike kmem_alloc() with KM_SLEEP on Illumos.
*/
do {
/*
* Calling kmalloc_node() when the size >= spl_kmem_alloc_max
* is unsafe. This must fail for all for kmem_alloc() and
* kmem_zalloc() callers.
*
* For vmem_alloc() and vmem_zalloc() callers it is permissible
* to use __vmalloc(). However, in general use of __vmalloc()
* is strongly discouraged because a global lock must be
* acquired. Contention on this lock can significantly
* impact performance so frequently manipulating the virtual
* address space is strongly discouraged.
*/
if ((size > spl_kmem_alloc_max) || use_vmem) {
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
if (flags & KM_VMEM) {
ptr = __vmalloc(size, lflags, PAGE_KERNEL);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
} else {
return (NULL);
}
} else {
ptr = kmalloc_node(size, lflags, node);
}
if (likely(ptr) || (flags & KM_NOSLEEP))
return (ptr);
/*
* For vmem_alloc() and vmem_zalloc() callers retry immediately
* using __vmalloc() which is unlikely to fail.
*/
if ((flags & KM_VMEM) && (use_vmem == 0)) {
use_vmem = 1;
continue;
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
if (unlikely(__ratelimit(&kmem_alloc_ratelimit_state))) {
printk(KERN_WARNING
"Possible memory allocation deadlock: "
"size=%lu lflags=0x%x",
(unsigned long)size, lflags);
dump_stack();
}
/*
* Use cond_resched() instead of congestion_wait() to avoid
* deadlocking systems where there are no block devices.
*/
cond_resched();
} while (1);
return (NULL);
}
inline void
spl_kmem_free_impl(const void *buf, size_t size)
{
if (is_vmalloc_addr(buf))
vfree(buf);
else
kfree(buf);
}
/*
* Memory allocation and accounting for kmem_* * style allocations. When
* DEBUG_KMEM is enabled the total memory allocated will be tracked and
* any memory leaked will be reported during module unload.
*
* ./configure --enable-debug-kmem
*/
#ifdef DEBUG_KMEM
/* Shim layer memory accounting */
#ifdef HAVE_ATOMIC64_T
atomic64_t kmem_alloc_used = ATOMIC64_INIT(0);
unsigned long long kmem_alloc_max = 0;
#else /* HAVE_ATOMIC64_T */
atomic_t kmem_alloc_used = ATOMIC_INIT(0);
unsigned long long kmem_alloc_max = 0;
#endif /* HAVE_ATOMIC64_T */
EXPORT_SYMBOL(kmem_alloc_used);
EXPORT_SYMBOL(kmem_alloc_max);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
inline void *
spl_kmem_alloc_debug(size_t size, int flags, int node)
{
void *ptr;
ptr = spl_kmem_alloc_impl(size, flags, node);
if (ptr) {
kmem_alloc_used_add(size);
if (unlikely(kmem_alloc_used_read() > kmem_alloc_max))
kmem_alloc_max = kmem_alloc_used_read();
}
return (ptr);
}
inline void
spl_kmem_free_debug(const void *ptr, size_t size)
{
kmem_alloc_used_sub(size);
spl_kmem_free_impl(ptr, size);
}
/*
* When DEBUG_KMEM_TRACKING is enabled not only will total bytes be tracked
Autoconf --enable-debug-* cleanup Cleanup the --enable-debug-* configure options, this has been pending for quite some time and I am glad I finally got to it. To summerize: 1) All SPL_AC_DEBUG_* macros were updated to be a more autoconf friendly. This mainly involved shift to the GNU approved usage of AC_ARG_ENABLE and ensuring AS_IF is used rather than directly using an if [ test ] construct. 2) --enable-debug-kmem=yes by default. This simply enabled keeping a running tally of total memory allocated and freed and reporting a memory leak if there was one at module unload. Additionally, it ensure /proc/spl/kmem/slab will exist by default which is handy. The overhead is low for this and it should not impact performance. 3) --enable-debug-kmem-tracking=no by default. This option was added to provide a configure option to enable to detailed memory allocation tracking. This support was always there but you had to know where to turn it on. By default this support is disabled because it is known to badly hurt performence, however it is invaluable when chasing a memory leak. 4) --enable-debug-kstat removed. After further reflection I can't see why you would ever really want to turn this support off. It is now always on which had the nice side effect of simplifying the proc handling code in spl-proc.c. We can now always assume the top level directory will be there. 5) --enable-debug-callb removed. This never really did anything, it was put in provisionally because it might have been needed. It turns out it was not so I am just removing it to prevent confusion.
2009-10-30 20:58:51 +00:00
* but also the location of every alloc and free. When the SPL module is
* unloaded a list of all leaked addresses and where they were allocated
* will be dumped to the console. Enabling this feature has a significant
* impact on performance but it makes finding memory leaks straight forward.
*
* Not surprisingly with debugging enabled the xmem_locks are very highly
* contended particularly on xfree(). If we want to run with this detailed
* debugging enabled for anything other than debugging we need to minimize
* the contention by moving to a lock per xmem_table entry model.
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
*
* ./configure --enable-debug-kmem-tracking
*/
#ifdef DEBUG_KMEM_TRACKING
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#include <linux/hash.h>
#include <linux/ctype.h>
#define KMEM_HASH_BITS 10
#define KMEM_TABLE_SIZE (1 << KMEM_HASH_BITS)
typedef struct kmem_debug {
struct hlist_node kd_hlist; /* Hash node linkage */
struct list_head kd_list; /* List of all allocations */
void *kd_addr; /* Allocation pointer */
size_t kd_size; /* Allocation size */
const char *kd_func; /* Allocation function */
int kd_line; /* Allocation line */
} kmem_debug_t;
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
static spinlock_t kmem_lock;
static struct hlist_head kmem_table[KMEM_TABLE_SIZE];
static struct list_head kmem_list;
static kmem_debug_t *
kmem_del_init(spinlock_t *lock, struct hlist_head *table,
int bits, const void *addr)
{
struct hlist_head *head;
struct hlist_node *node;
struct kmem_debug *p;
unsigned long flags;
spin_lock_irqsave(lock, flags);
head = &table[hash_ptr((void *)addr, bits)];
hlist_for_each(node, head) {
p = list_entry(node, struct kmem_debug, kd_hlist);
if (p->kd_addr == addr) {
hlist_del_init(&p->kd_hlist);
list_del_init(&p->kd_list);
spin_unlock_irqrestore(lock, flags);
return (p);
}
}
spin_unlock_irqrestore(lock, flags);
return (NULL);
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
inline void *
spl_kmem_alloc_track(size_t size, int flags,
const char *func, int line, int node)
{
void *ptr = NULL;
kmem_debug_t *dptr;
unsigned long irq_flags;
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
dptr = kmalloc(sizeof (kmem_debug_t), kmem_flags_convert(flags));
if (dptr == NULL)
return (NULL);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
dptr->kd_func = __strdup(func, flags);
if (dptr->kd_func == NULL) {
kfree(dptr);
return (NULL);
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
ptr = spl_kmem_alloc_debug(size, flags, node);
if (ptr == NULL) {
kfree(dptr->kd_func);
kfree(dptr);
return (NULL);
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
INIT_HLIST_NODE(&dptr->kd_hlist);
INIT_LIST_HEAD(&dptr->kd_list);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
dptr->kd_addr = ptr;
dptr->kd_size = size;
dptr->kd_line = line;
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
spin_lock_irqsave(&kmem_lock, irq_flags);
hlist_add_head(&dptr->kd_hlist,
&kmem_table[hash_ptr(ptr, KMEM_HASH_BITS)]);
list_add_tail(&dptr->kd_list, &kmem_list);
spin_unlock_irqrestore(&kmem_lock, irq_flags);
return (ptr);
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
inline void
spl_kmem_free_track(const void *ptr, size_t size)
{
kmem_debug_t *dptr;
/* Ignore NULL pointer since we haven't tracked it at all*/
if (ptr == NULL)
return;
/* Must exist in hash due to kmem_alloc() */
dptr = kmem_del_init(&kmem_lock, kmem_table, KMEM_HASH_BITS, ptr);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
ASSERT3P(dptr, !=, NULL);
ASSERT3S(dptr->kd_size, ==, size);
kfree(dptr->kd_func);
kfree(dptr);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
spl_kmem_free_debug(ptr, size);
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#endif /* DEBUG_KMEM_TRACKING */
#endif /* DEBUG_KMEM */
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
/*
* Public kmem_alloc(), kmem_zalloc() and kmem_free() interfaces.
*/
void *
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
spl_kmem_alloc(size_t size, int flags, const char *func, int line)
{
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
ASSERT0(flags & ~KM_PUBLIC_MASK);
#if !defined(DEBUG_KMEM)
return (spl_kmem_alloc_impl(size, flags, NUMA_NO_NODE));
#elif !defined(DEBUG_KMEM_TRACKING)
return (spl_kmem_alloc_debug(size, flags, NUMA_NO_NODE));
#else
return (spl_kmem_alloc_track(size, flags, func, line, NUMA_NO_NODE));
#endif
}
EXPORT_SYMBOL(spl_kmem_alloc);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
void *
spl_kmem_zalloc(size_t size, int flags, const char *func, int line)
{
ASSERT0(flags & ~KM_PUBLIC_MASK);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
flags |= KM_ZERO;
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#if !defined(DEBUG_KMEM)
return (spl_kmem_alloc_impl(size, flags, NUMA_NO_NODE));
#elif !defined(DEBUG_KMEM_TRACKING)
return (spl_kmem_alloc_debug(size, flags, NUMA_NO_NODE));
#else
return (spl_kmem_alloc_track(size, flags, func, line, NUMA_NO_NODE));
#endif
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
EXPORT_SYMBOL(spl_kmem_zalloc);
void
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
spl_kmem_free(const void *buf, size_t size)
{
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#if !defined(DEBUG_KMEM)
return (spl_kmem_free_impl(buf, size));
#elif !defined(DEBUG_KMEM_TRACKING)
return (spl_kmem_free_debug(buf, size));
#else
return (spl_kmem_free_track(buf, size));
#endif
}
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
EXPORT_SYMBOL(spl_kmem_free);
#if defined(DEBUG_KMEM) && defined(DEBUG_KMEM_TRACKING)
static char *
spl_sprintf_addr(kmem_debug_t *kd, char *str, int len, int min)
{
int size = ((len - 1) < kd->kd_size) ? (len - 1) : kd->kd_size;
int i, flag = 1;
ASSERT(str != NULL && len >= 17);
memset(str, 0, len);
/*
* Check for a fully printable string, and while we are at
* it place the printable characters in the passed buffer.
*/
for (i = 0; i < size; i++) {
str[i] = ((char *)(kd->kd_addr))[i];
if (isprint(str[i])) {
continue;
} else {
/*
* Minimum number of printable characters found
* to make it worthwhile to print this as ascii.
*/
if (i > min)
break;
flag = 0;
break;
}
}
if (!flag) {
sprintf(str, "%02x%02x%02x%02x%02x%02x%02x%02x",
*((uint8_t *)kd->kd_addr),
*((uint8_t *)kd->kd_addr + 2),
*((uint8_t *)kd->kd_addr + 4),
*((uint8_t *)kd->kd_addr + 6),
*((uint8_t *)kd->kd_addr + 8),
*((uint8_t *)kd->kd_addr + 10),
*((uint8_t *)kd->kd_addr + 12),
*((uint8_t *)kd->kd_addr + 14));
}
return (str);
}
static int
spl_kmem_init_tracking(struct list_head *list, spinlock_t *lock, int size)
{
int i;
spin_lock_init(lock);
INIT_LIST_HEAD(list);
for (i = 0; i < size; i++)
INIT_HLIST_HEAD(&kmem_table[i]);
return (0);
}
static void
spl_kmem_fini_tracking(struct list_head *list, spinlock_t *lock)
{
unsigned long flags;
kmem_debug_t *kd;
char str[17];
spin_lock_irqsave(lock, flags);
if (!list_empty(list))
printk(KERN_WARNING "%-16s %-5s %-16s %s:%s\n", "address",
"size", "data", "func", "line");
list_for_each_entry(kd, list, kd_list)
printk(KERN_WARNING "%p %-5d %-16s %s:%d\n", kd->kd_addr,
(int)kd->kd_size, spl_sprintf_addr(kd, str, 17, 8),
kd->kd_func, kd->kd_line);
spin_unlock_irqrestore(lock, flags);
}
#endif /* DEBUG_KMEM && DEBUG_KMEM_TRACKING */
int
spl_kmem_init(void)
{
#ifdef DEBUG_KMEM
kmem_alloc_used_set(0);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#ifdef DEBUG_KMEM_TRACKING
spl_kmem_init_tracking(&kmem_list, &kmem_lock, KMEM_TABLE_SIZE);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#endif /* DEBUG_KMEM_TRACKING */
#endif /* DEBUG_KMEM */
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
return (0);
}
void
spl_kmem_fini(void)
{
#ifdef DEBUG_KMEM
/*
* Display all unreclaimed memory addresses, including the
* allocation size and the first few bytes of what's located
* at that address to aid in debugging. Performance is not
* a serious concern here since it is module unload time.
*/
if (kmem_alloc_used_read() != 0)
printk(KERN_WARNING "kmem leaked %ld/%llu bytes\n",
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
(unsigned long)kmem_alloc_used_read(), kmem_alloc_max);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#ifdef DEBUG_KMEM_TRACKING
spl_kmem_fini_tracking(&kmem_list, &kmem_lock);
Refactor generic memory allocation interfaces This patch achieves the following goals: 1. It replaces the preprocessor kmem flag to gfp flag mapping with proper translation logic. This eliminates the potential for surprises that were previously possible where kmem flags were mapped to gfp flags. 2. It maps vmem_alloc() allocations to kmem_alloc() for allocations sized less than or equal to the newly-added spl_kmem_alloc_max parameter. This ensures that small allocations will not contend on a single global lock, large allocations can still be handled, and potentially limited virtual address space will not be squandered. This behavior is entirely different than under Illumos due to different memory management strategies employed by the respective kernels. However, this functionally provides the semantics required. 3. The --disable-debug-kmem, --enable-debug-kmem (default), and --enable-debug-kmem-tracking allocators have been unified in to a single spl_kmem_alloc_impl() allocation function. This was done to simplify the code and make it more maintainable. 4. Improve portability by exposing an implementation of the memory allocations functions that can be safely used in the same way they are used on Illumos. Specifically, callers may safely use KM_SLEEP in contexts which perform filesystem IO. This allows us to eliminate an entire class of Linux specific changes which were previously required to avoid deadlocking the system. This change will be largely transparent to existing callers but there are a few caveats: 1. Because the headers were refactored and extraneous includes removed callers may find they need to explicitly add additional #includes. In particular, kmem_cache.h must now be explicitly includes to access the SPL's kmem cache implementation. This behavior is different from Illumos but it was done to avoid always masking the Linux slab functions when kmem.h is included. 2. Callers, like Lustre, which made assumptions about the definitions of KM_SLEEP, KM_NOSLEEP, and KM_PUSHPAGE will need to be updated. Other callers such as ZFS which did not will not require changes. 3. KM_PUSHPAGE is no longer overloaded to imply GFP_NOIO. It retains its original meaning of allowing allocations to access reserved memory. KM_PUSHPAGE callers can be converted back to KM_SLEEP. 4. The KM_NODEBUG flags has been retired and the default warning threshold increased to 32k. 5. The kmem_virt() functions has been removed. For callers which need to distinguish between a physical and virtual address use is_vmalloc_addr(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-12-08 20:37:14 +00:00
#endif /* DEBUG_KMEM_TRACKING */
#endif /* DEBUG_KMEM */
}