zfs/module/zfs/zfs_fm.c

1459 lines
42 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
2009-07-02 22:44:48 +00:00
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
2008-11-20 20:01:55 +00:00
* Use is subject to license terms.
*/
/*
* Copyright (c) 2012,2021 by Delphix. All rights reserved.
*/
2008-11-20 20:01:55 +00:00
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/vdev.h>
#include <sys/vdev_impl.h>
#include <sys/zio.h>
#include <sys/zio_checksum.h>
2008-11-20 20:01:55 +00:00
#include <sys/fm/fs/zfs.h>
#include <sys/fm/protocol.h>
#include <sys/fm/util.h>
#include <sys/sysevent.h>
/*
* This general routine is responsible for generating all the different ZFS
* ereports. The payload is dependent on the class, and which arguments are
* supplied to the function:
*
* EREPORT POOL VDEV IO
* block X X X
* data X X
* device X X
* pool X
*
* If we are in a loading state, all errors are chained together by the same
* SPA-wide ENA (Error Numeric Association).
2008-11-20 20:01:55 +00:00
*
* For isolated I/O requests, we get the ENA from the zio_t. The propagation
* gets very complicated due to RAID-Z, gang blocks, and vdev caching. We want
* to chain together all ereports associated with a logical piece of data. For
* read I/Os, there are basically three 'types' of I/O, which form a roughly
* layered diagram:
*
* +---------------+
* | Aggregate I/O | No associated logical data or device
* +---------------+
* |
* V
* +---------------+ Reads associated with a piece of logical data.
* | Read I/O | This includes reads on behalf of RAID-Z,
* +---------------+ mirrors, gang blocks, retries, etc.
* |
* V
* +---------------+ Reads associated with a particular device, but
* | Physical I/O | no logical data. Issued as part of vdev caching
* +---------------+ and I/O aggregation.
*
* Note that 'physical I/O' here is not the same terminology as used in the rest
* of ZIO. Typically, 'physical I/O' simply means that there is no attached
* blockpointer. But I/O with no associated block pointer can still be related
* to a logical piece of data (i.e. RAID-Z requests).
*
* Purely physical I/O always have unique ENAs. They are not related to a
* particular piece of logical data, and therefore cannot be chained together.
* We still generate an ereport, but the DE doesn't correlate it with any
* logical piece of data. When such an I/O fails, the delegated I/O requests
* will issue a retry, which will trigger the 'real' ereport with the correct
* ENA.
*
* We keep track of the ENA for a ZIO chain through the 'io_logical' member.
* When a new logical I/O is issued, we set this to point to itself. Child I/Os
* then inherit this pointer, so that when it is first set subsequent failures
* will use the same ENA. For vdev cache fill and queue aggregation I/O,
* this pointer is set to NULL, and no ereport will be generated (since it
* doesn't actually correspond to any particular device or piece of data,
* and the caller will always retry without caching or queueing anyway).
*
* For checksum errors, we want to include more information about the actual
* error which occurs. Accordingly, we build an ereport when the error is
* noticed, but instead of sending it in immediately, we hang it off of the
* io_cksum_report field of the logical IO. When the logical IO completes
* (successfully or not), zfs_ereport_finish_checksum() is called with the
* good and bad versions of the buffer (if available), and we annotate the
* ereport with information about the differences.
2008-11-20 20:01:55 +00:00
*/
#ifdef _KERNEL
/*
* Duplicate ereport Detection
*
* Some ereports are retained momentarily for detecting duplicates. These
* are kept in a recent_events_node_t in both a time-ordered list and an AVL
* tree of recent unique ereports.
*
* The lifespan of these recent ereports is bounded (15 mins) and a cleaner
* task is used to purge stale entries.
*/
static list_t recent_events_list;
static avl_tree_t recent_events_tree;
static kmutex_t recent_events_lock;
static taskqid_t recent_events_cleaner_tqid;
/*
* Each node is about 128 bytes so 2,000 would consume 1/4 MiB.
*
* This setting can be changed dynamically and setting it to zero
* disables duplicate detection.
*/
unsigned int zfs_zevent_retain_max = 2000;
/*
* The lifespan for a recent ereport entry. The default of 15 minutes is
* intended to outlive the zfs diagnosis engine's threshold of 10 errors
* over a period of 10 minutes.
*/
unsigned int zfs_zevent_retain_expire_secs = 900;
typedef enum zfs_subclass {
ZSC_IO,
ZSC_DATA,
ZSC_CHECKSUM
} zfs_subclass_t;
typedef struct {
/* common criteria */
uint64_t re_pool_guid;
uint64_t re_vdev_guid;
int re_io_error;
uint64_t re_io_size;
uint64_t re_io_offset;
zfs_subclass_t re_subclass;
zio_priority_t re_io_priority;
/* logical zio criteria (optional) */
zbookmark_phys_t re_io_bookmark;
/* internal state */
avl_node_t re_tree_link;
list_node_t re_list_link;
uint64_t re_timestamp;
} recent_events_node_t;
static int
recent_events_compare(const void *a, const void *b)
{
const recent_events_node_t *node1 = a;
const recent_events_node_t *node2 = b;
int cmp;
/*
* The comparison order here is somewhat arbitrary.
* What's important is that if every criteria matches, then it
* is a duplicate (i.e. compare returns 0)
*/
if ((cmp = TREE_CMP(node1->re_subclass, node2->re_subclass)) != 0)
return (cmp);
if ((cmp = TREE_CMP(node1->re_pool_guid, node2->re_pool_guid)) != 0)
return (cmp);
if ((cmp = TREE_CMP(node1->re_vdev_guid, node2->re_vdev_guid)) != 0)
return (cmp);
if ((cmp = TREE_CMP(node1->re_io_error, node2->re_io_error)) != 0)
return (cmp);
if ((cmp = TREE_CMP(node1->re_io_priority, node2->re_io_priority)) != 0)
return (cmp);
if ((cmp = TREE_CMP(node1->re_io_size, node2->re_io_size)) != 0)
return (cmp);
if ((cmp = TREE_CMP(node1->re_io_offset, node2->re_io_offset)) != 0)
return (cmp);
const zbookmark_phys_t *zb1 = &node1->re_io_bookmark;
const zbookmark_phys_t *zb2 = &node2->re_io_bookmark;
if ((cmp = TREE_CMP(zb1->zb_objset, zb2->zb_objset)) != 0)
return (cmp);
if ((cmp = TREE_CMP(zb1->zb_object, zb2->zb_object)) != 0)
return (cmp);
if ((cmp = TREE_CMP(zb1->zb_level, zb2->zb_level)) != 0)
return (cmp);
if ((cmp = TREE_CMP(zb1->zb_blkid, zb2->zb_blkid)) != 0)
return (cmp);
return (0);
}
static void zfs_ereport_schedule_cleaner(void);
/*
* background task to clean stale recent event nodes.
*/
/*ARGSUSED*/
static void
zfs_ereport_cleaner(void *arg)
{
recent_events_node_t *entry;
uint64_t now = gethrtime();
/*
* purge expired entries
*/
mutex_enter(&recent_events_lock);
while ((entry = list_tail(&recent_events_list)) != NULL) {
uint64_t age = NSEC2SEC(now - entry->re_timestamp);
if (age <= zfs_zevent_retain_expire_secs)
break;
/* remove expired node */
avl_remove(&recent_events_tree, entry);
list_remove(&recent_events_list, entry);
kmem_free(entry, sizeof (*entry));
}
/* Restart the cleaner if more entries remain */
recent_events_cleaner_tqid = 0;
if (!list_is_empty(&recent_events_list))
zfs_ereport_schedule_cleaner();
mutex_exit(&recent_events_lock);
}
static void
zfs_ereport_schedule_cleaner(void)
{
ASSERT(MUTEX_HELD(&recent_events_lock));
uint64_t timeout = SEC2NSEC(zfs_zevent_retain_expire_secs + 1);
recent_events_cleaner_tqid = taskq_dispatch_delay(
system_delay_taskq, zfs_ereport_cleaner, NULL, TQ_SLEEP,
ddi_get_lbolt() + NSEC_TO_TICK(timeout));
}
/*
* Clear entries for a given vdev or all vdevs in a pool when vdev == NULL
*/
void
zfs_ereport_clear(spa_t *spa, vdev_t *vd)
{
uint64_t vdev_guid, pool_guid;
int cnt = 0;
ASSERT(vd != NULL || spa != NULL);
if (vd == NULL) {
vdev_guid = 0;
pool_guid = spa_guid(spa);
} else {
vdev_guid = vd->vdev_guid;
pool_guid = 0;
}
mutex_enter(&recent_events_lock);
recent_events_node_t *next = list_head(&recent_events_list);
while (next != NULL) {
recent_events_node_t *entry = next;
next = list_next(&recent_events_list, next);
if (entry->re_vdev_guid == vdev_guid ||
entry->re_pool_guid == pool_guid) {
avl_remove(&recent_events_tree, entry);
list_remove(&recent_events_list, entry);
kmem_free(entry, sizeof (*entry));
cnt++;
}
}
mutex_exit(&recent_events_lock);
}
/*
* Check if an ereport would be a duplicate of one recently posted.
*
* An ereport is considered a duplicate if the set of criteria in
* recent_events_node_t all match.
*
* Only FM_EREPORT_ZFS_IO, FM_EREPORT_ZFS_DATA, and FM_EREPORT_ZFS_CHECKSUM
* are candidates for duplicate checking.
*/
static boolean_t
zfs_ereport_is_duplicate(const char *subclass, spa_t *spa, vdev_t *vd,
const zbookmark_phys_t *zb, zio_t *zio, uint64_t offset, uint64_t size)
{
recent_events_node_t search = {0}, *entry;
if (vd == NULL || zio == NULL)
return (B_FALSE);
if (zfs_zevent_retain_max == 0)
return (B_FALSE);
if (strcmp(subclass, FM_EREPORT_ZFS_IO) == 0)
search.re_subclass = ZSC_IO;
else if (strcmp(subclass, FM_EREPORT_ZFS_DATA) == 0)
search.re_subclass = ZSC_DATA;
else if (strcmp(subclass, FM_EREPORT_ZFS_CHECKSUM) == 0)
search.re_subclass = ZSC_CHECKSUM;
else
return (B_FALSE);
search.re_pool_guid = spa_guid(spa);
search.re_vdev_guid = vd->vdev_guid;
search.re_io_error = zio->io_error;
search.re_io_priority = zio->io_priority;
/* if size is supplied use it over what's in zio */
if (size) {
search.re_io_size = size;
search.re_io_offset = offset;
} else {
search.re_io_size = zio->io_size;
search.re_io_offset = zio->io_offset;
}
/* grab optional logical zio criteria */
if (zb != NULL) {
search.re_io_bookmark.zb_objset = zb->zb_objset;
search.re_io_bookmark.zb_object = zb->zb_object;
search.re_io_bookmark.zb_level = zb->zb_level;
search.re_io_bookmark.zb_blkid = zb->zb_blkid;
}
uint64_t now = gethrtime();
mutex_enter(&recent_events_lock);
/* check if we have seen this one recently */
entry = avl_find(&recent_events_tree, &search, NULL);
if (entry != NULL) {
uint64_t age = NSEC2SEC(now - entry->re_timestamp);
/*
* There is still an active cleaner (since we're here).
* Reset the last seen time for this duplicate entry
* so that its lifespand gets extended.
*/
list_remove(&recent_events_list, entry);
list_insert_head(&recent_events_list, entry);
entry->re_timestamp = now;
zfs_zevent_track_duplicate();
mutex_exit(&recent_events_lock);
return (age <= zfs_zevent_retain_expire_secs);
}
if (avl_numnodes(&recent_events_tree) >= zfs_zevent_retain_max) {
/* recycle oldest node */
entry = list_tail(&recent_events_list);
ASSERT(entry != NULL);
list_remove(&recent_events_list, entry);
avl_remove(&recent_events_tree, entry);
} else {
entry = kmem_alloc(sizeof (recent_events_node_t), KM_SLEEP);
}
/* record this as a recent ereport */
*entry = search;
avl_add(&recent_events_tree, entry);
list_insert_head(&recent_events_list, entry);
entry->re_timestamp = now;
/* Start a cleaner if not already scheduled */
if (recent_events_cleaner_tqid == 0)
zfs_ereport_schedule_cleaner();
mutex_exit(&recent_events_lock);
return (B_FALSE);
}
void
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zfs_zevent_post_cb(nvlist_t *nvl, nvlist_t *detector)
{
if (nvl)
fm_nvlist_destroy(nvl, FM_NVA_FREE);
if (detector)
fm_nvlist_destroy(detector, FM_NVA_FREE);
}
/*
* We want to rate limit ZIO delay, deadman, and checksum events so as to not
* flood zevent consumers when a disk is acting up.
*
* Returns 1 if we're ratelimiting, 0 if not.
*/
static int
zfs_is_ratelimiting_event(const char *subclass, vdev_t *vd)
{
int rc = 0;
/*
* zfs_ratelimit() returns 1 if we're *not* ratelimiting and 0 if we
* are. Invert it to get our return value.
*/
if (strcmp(subclass, FM_EREPORT_ZFS_DELAY) == 0) {
rc = !zfs_ratelimit(&vd->vdev_delay_rl);
} else if (strcmp(subclass, FM_EREPORT_ZFS_DEADMAN) == 0) {
rc = !zfs_ratelimit(&vd->vdev_deadman_rl);
} else if (strcmp(subclass, FM_EREPORT_ZFS_CHECKSUM) == 0) {
rc = !zfs_ratelimit(&vd->vdev_checksum_rl);
}
if (rc) {
/* We're rate limiting */
fm_erpt_dropped_increment();
}
return (rc);
}
/*
* Return B_TRUE if the event actually posted, B_FALSE if not.
*/
static boolean_t
zfs_ereport_start(nvlist_t **ereport_out, nvlist_t **detector_out,
const char *subclass, spa_t *spa, vdev_t *vd, const zbookmark_phys_t *zb,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
zio_t *zio, uint64_t stateoroffset, uint64_t size)
2008-11-20 20:01:55 +00:00
{
nvlist_t *ereport, *detector;
2008-11-20 20:01:55 +00:00
uint64_t ena;
char class[64];
if ((ereport = fm_nvlist_create(NULL)) == NULL)
return (B_FALSE);
2008-11-20 20:01:55 +00:00
if ((detector = fm_nvlist_create(NULL)) == NULL) {
fm_nvlist_destroy(ereport, FM_NVA_FREE);
return (B_FALSE);
2008-11-20 20:01:55 +00:00
}
/*
* Serialize ereport generation
*/
mutex_enter(&spa->spa_errlist_lock);
/*
* Determine the ENA to use for this event. If we are in a loading
* state, use a SPA-wide ENA. Otherwise, if we are in an I/O state, use
* a root zio-wide ENA. Otherwise, simply use a unique ENA.
*/
if (spa_load_state(spa) != SPA_LOAD_NONE) {
2008-11-20 20:01:55 +00:00
if (spa->spa_ena == 0)
spa->spa_ena = fm_ena_generate(0, FM_ENA_FMT1);
ena = spa->spa_ena;
} else if (zio != NULL && zio->io_logical != NULL) {
if (zio->io_logical->io_ena == 0)
zio->io_logical->io_ena =
fm_ena_generate(0, FM_ENA_FMT1);
ena = zio->io_logical->io_ena;
} else {
ena = fm_ena_generate(0, FM_ENA_FMT1);
}
/*
* Construct the full class, detector, and other standard FMA fields.
*/
(void) snprintf(class, sizeof (class), "%s.%s",
ZFS_ERROR_CLASS, subclass);
fm_fmri_zfs_set(detector, FM_ZFS_SCHEME_VERSION, spa_guid(spa),
vd != NULL ? vd->vdev_guid : 0);
fm_ereport_set(ereport, FM_EREPORT_VERSION, class, ena, detector, NULL);
/*
* Construct the per-ereport payload, depending on which parameters are
* passed in.
*/
/*
* Generic payload members common to all ereports.
*/
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_POOL, DATA_TYPE_STRING, spa_name(spa),
FM_EREPORT_PAYLOAD_ZFS_POOL_GUID, DATA_TYPE_UINT64, spa_guid(spa),
FM_EREPORT_PAYLOAD_ZFS_POOL_STATE, DATA_TYPE_UINT64,
(uint64_t)spa_state(spa),
2008-11-20 20:01:55 +00:00
FM_EREPORT_PAYLOAD_ZFS_POOL_CONTEXT, DATA_TYPE_INT32,
(int32_t)spa_load_state(spa), NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_POOL_FAILMODE,
DATA_TYPE_STRING,
spa_get_failmode(spa) == ZIO_FAILURE_MODE_WAIT ?
FM_EREPORT_FAILMODE_WAIT :
spa_get_failmode(spa) == ZIO_FAILURE_MODE_CONTINUE ?
FM_EREPORT_FAILMODE_CONTINUE : FM_EREPORT_FAILMODE_PANIC,
NULL);
2008-11-20 20:01:55 +00:00
if (vd != NULL) {
vdev_t *pvd = vd->vdev_parent;
vdev_queue_t *vq = &vd->vdev_queue;
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
vdev_stat_t *vs = &vd->vdev_stat;
vdev_t *spare_vd;
uint64_t *spare_guids;
char **spare_paths;
int i, spare_count;
2008-11-20 20:01:55 +00:00
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID,
DATA_TYPE_UINT64, vd->vdev_guid,
FM_EREPORT_PAYLOAD_ZFS_VDEV_TYPE,
DATA_TYPE_STRING, vd->vdev_ops->vdev_op_type, NULL);
2009-07-02 22:44:48 +00:00
if (vd->vdev_path != NULL)
2008-11-20 20:01:55 +00:00
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_PATH,
DATA_TYPE_STRING, vd->vdev_path, NULL);
2009-07-02 22:44:48 +00:00
if (vd->vdev_devid != NULL)
2008-11-20 20:01:55 +00:00
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_DEVID,
DATA_TYPE_STRING, vd->vdev_devid, NULL);
2009-07-02 22:44:48 +00:00
if (vd->vdev_fru != NULL)
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_FRU,
DATA_TYPE_STRING, vd->vdev_fru, NULL);
if (vd->vdev_enc_sysfs_path != NULL)
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_ENC_SYSFS_PATH,
DATA_TYPE_STRING, vd->vdev_enc_sysfs_path, NULL);
if (vd->vdev_ashift)
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_ASHIFT,
DATA_TYPE_UINT64, vd->vdev_ashift, NULL);
2008-11-20 20:01:55 +00:00
if (vq != NULL) {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_COMP_TS,
DATA_TYPE_UINT64, vq->vq_io_complete_ts, NULL);
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_DELTA_TS,
DATA_TYPE_UINT64, vq->vq_io_delta_ts, NULL);
}
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
if (vs != NULL) {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_VDEV_READ_ERRORS,
DATA_TYPE_UINT64, vs->vs_read_errors,
FM_EREPORT_PAYLOAD_ZFS_VDEV_WRITE_ERRORS,
DATA_TYPE_UINT64, vs->vs_write_errors,
FM_EREPORT_PAYLOAD_ZFS_VDEV_CKSUM_ERRORS,
DATA_TYPE_UINT64, vs->vs_checksum_errors,
FM_EREPORT_PAYLOAD_ZFS_VDEV_DELAYS,
DATA_TYPE_UINT64, vs->vs_slow_ios,
NULL);
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
}
2008-11-20 20:01:55 +00:00
if (pvd != NULL) {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_PARENT_GUID,
DATA_TYPE_UINT64, pvd->vdev_guid,
FM_EREPORT_PAYLOAD_ZFS_PARENT_TYPE,
DATA_TYPE_STRING, pvd->vdev_ops->vdev_op_type,
NULL);
if (pvd->vdev_path)
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_PARENT_PATH,
DATA_TYPE_STRING, pvd->vdev_path, NULL);
if (pvd->vdev_devid)
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_PARENT_DEVID,
DATA_TYPE_STRING, pvd->vdev_devid, NULL);
}
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
spare_count = spa->spa_spares.sav_count;
spare_paths = kmem_zalloc(sizeof (char *) * spare_count,
KM_SLEEP);
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
spare_guids = kmem_zalloc(sizeof (uint64_t) * spare_count,
KM_SLEEP);
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
for (i = 0; i < spare_count; i++) {
spare_vd = spa->spa_spares.sav_vdevs[i];
if (spare_vd) {
spare_paths[i] = spare_vd->vdev_path;
spare_guids[i] = spare_vd->vdev_guid;
}
}
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_VDEV_SPARE_PATHS,
DATA_TYPE_STRING_ARRAY, spare_count, spare_paths,
FM_EREPORT_PAYLOAD_ZFS_VDEV_SPARE_GUIDS,
DATA_TYPE_UINT64_ARRAY, spare_count, spare_guids, NULL);
kmem_free(spare_guids, sizeof (uint64_t) * spare_count);
kmem_free(spare_paths, sizeof (char *) * spare_count);
2008-11-20 20:01:55 +00:00
}
if (zio != NULL) {
/*
* Payload common to all I/Os.
*/
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_ERR,
DATA_TYPE_INT32, zio->io_error, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_FLAGS,
DATA_TYPE_INT32, zio->io_flags, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_STAGE,
DATA_TYPE_UINT32, zio->io_stage, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_PIPELINE,
DATA_TYPE_UINT32, zio->io_pipeline, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_DELAY,
DATA_TYPE_UINT64, zio->io_delay, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_TIMESTAMP,
DATA_TYPE_UINT64, zio->io_timestamp, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_DELTA,
DATA_TYPE_UINT64, zio->io_delta, NULL);
fm_payload_set(ereport, FM_EREPORT_PAYLOAD_ZFS_ZIO_PRIORITY,
DATA_TYPE_UINT32, zio->io_priority, NULL);
2008-11-20 20:01:55 +00:00
/*
* If the 'size' parameter is non-zero, it indicates this is a
* RAID-Z or other I/O where the physical offset and length are
* provided for us, instead of within the zio_t.
*/
if (vd != NULL) {
if (size)
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET,
DATA_TYPE_UINT64, stateoroffset,
FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE,
DATA_TYPE_UINT64, size, NULL);
else
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET,
DATA_TYPE_UINT64, zio->io_offset,
FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE,
DATA_TYPE_UINT64, zio->io_size, NULL);
}
} else if (vd != NULL) {
/*
* If we have a vdev but no zio, this is a device fault, and the
* 'stateoroffset' parameter indicates the previous state of the
* vdev.
*/
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_PREV_STATE,
DATA_TYPE_UINT64, stateoroffset, NULL);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
/*
* Payload for I/Os with corresponding logical information.
*/
if (zb != NULL && (zio == NULL || zio->io_logical != NULL)) {
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_ZIO_OBJSET,
DATA_TYPE_UINT64, zb->zb_objset,
FM_EREPORT_PAYLOAD_ZFS_ZIO_OBJECT,
DATA_TYPE_UINT64, zb->zb_object,
FM_EREPORT_PAYLOAD_ZFS_ZIO_LEVEL,
DATA_TYPE_INT64, zb->zb_level,
FM_EREPORT_PAYLOAD_ZFS_ZIO_BLKID,
DATA_TYPE_UINT64, zb->zb_blkid, NULL);
}
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
2008-11-20 20:01:55 +00:00
mutex_exit(&spa->spa_errlist_lock);
*ereport_out = ereport;
*detector_out = detector;
return (B_TRUE);
}
/* if it's <= 128 bytes, save the corruption directly */
#define ZFM_MAX_INLINE (128 / sizeof (uint64_t))
#define MAX_RANGES 16
typedef struct zfs_ecksum_info {
/* histograms of set and cleared bits by bit number in a 64-bit word */
uint32_t zei_histogram_set[sizeof (uint64_t) * NBBY];
uint32_t zei_histogram_cleared[sizeof (uint64_t) * NBBY];
/* inline arrays of bits set and cleared. */
uint64_t zei_bits_set[ZFM_MAX_INLINE];
uint64_t zei_bits_cleared[ZFM_MAX_INLINE];
/*
* for each range, the number of bits set and cleared. The Hamming
* distance between the good and bad buffers is the sum of them all.
*/
uint32_t zei_range_sets[MAX_RANGES];
uint32_t zei_range_clears[MAX_RANGES];
struct zei_ranges {
uint32_t zr_start;
uint32_t zr_end;
} zei_ranges[MAX_RANGES];
size_t zei_range_count;
uint32_t zei_mingap;
uint32_t zei_allowed_mingap;
} zfs_ecksum_info_t;
static void
update_histogram(uint64_t value_arg, uint32_t *hist, uint32_t *count)
{
size_t i;
size_t bits = 0;
uint64_t value = BE_64(value_arg);
/* We store the bits in big-endian (largest-first) order */
for (i = 0; i < 64; i++) {
if (value & (1ull << i)) {
hist[63 - i]++;
++bits;
}
}
/* update the count of bits changed */
*count += bits;
}
/*
* We've now filled up the range array, and need to increase "mingap" and
* shrink the range list accordingly. zei_mingap is always the smallest
* distance between array entries, so we set the new_allowed_gap to be
* one greater than that. We then go through the list, joining together
* any ranges which are closer than the new_allowed_gap.
*
* By construction, there will be at least one. We also update zei_mingap
* to the new smallest gap, to prepare for our next invocation.
*/
static void
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zei_shrink_ranges(zfs_ecksum_info_t *eip)
{
uint32_t mingap = UINT32_MAX;
uint32_t new_allowed_gap = eip->zei_mingap + 1;
size_t idx, output;
size_t max = eip->zei_range_count;
struct zei_ranges *r = eip->zei_ranges;
ASSERT3U(eip->zei_range_count, >, 0);
ASSERT3U(eip->zei_range_count, <=, MAX_RANGES);
output = idx = 0;
while (idx < max - 1) {
uint32_t start = r[idx].zr_start;
uint32_t end = r[idx].zr_end;
while (idx < max - 1) {
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
idx++;
uint32_t nstart = r[idx].zr_start;
uint32_t nend = r[idx].zr_end;
uint32_t gap = nstart - end;
if (gap < new_allowed_gap) {
end = nend;
continue;
}
if (gap < mingap)
mingap = gap;
break;
}
r[output].zr_start = start;
r[output].zr_end = end;
output++;
}
ASSERT3U(output, <, eip->zei_range_count);
eip->zei_range_count = output;
eip->zei_mingap = mingap;
eip->zei_allowed_mingap = new_allowed_gap;
}
static void
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zei_add_range(zfs_ecksum_info_t *eip, int start, int end)
{
struct zei_ranges *r = eip->zei_ranges;
size_t count = eip->zei_range_count;
if (count >= MAX_RANGES) {
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zei_shrink_ranges(eip);
count = eip->zei_range_count;
}
if (count == 0) {
eip->zei_mingap = UINT32_MAX;
eip->zei_allowed_mingap = 1;
} else {
int gap = start - r[count - 1].zr_end;
if (gap < eip->zei_allowed_mingap) {
r[count - 1].zr_end = end;
return;
}
if (gap < eip->zei_mingap)
eip->zei_mingap = gap;
}
r[count].zr_start = start;
r[count].zr_end = end;
eip->zei_range_count++;
}
static size_t
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zei_range_total_size(zfs_ecksum_info_t *eip)
{
struct zei_ranges *r = eip->zei_ranges;
size_t count = eip->zei_range_count;
size_t result = 0;
size_t idx;
for (idx = 0; idx < count; idx++)
result += (r[idx].zr_end - r[idx].zr_start);
return (result);
}
static zfs_ecksum_info_t *
annotate_ecksum(nvlist_t *ereport, zio_bad_cksum_t *info,
const abd_t *goodabd, const abd_t *badabd, size_t size,
boolean_t drop_if_identical)
{
const uint64_t *good;
const uint64_t *bad;
uint64_t allset = 0;
uint64_t allcleared = 0;
size_t nui64s = size / sizeof (uint64_t);
size_t inline_size;
int no_inline = 0;
size_t idx;
size_t range;
size_t offset = 0;
ssize_t start = -1;
zfs_ecksum_info_t *eip = kmem_zalloc(sizeof (*eip), KM_SLEEP);
/* don't do any annotation for injected checksum errors */
if (info != NULL && info->zbc_injected)
return (eip);
if (info != NULL && info->zbc_has_cksum) {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_CKSUM_EXPECTED,
DATA_TYPE_UINT64_ARRAY,
sizeof (info->zbc_expected) / sizeof (uint64_t),
(uint64_t *)&info->zbc_expected,
FM_EREPORT_PAYLOAD_ZFS_CKSUM_ACTUAL,
DATA_TYPE_UINT64_ARRAY,
sizeof (info->zbc_actual) / sizeof (uint64_t),
(uint64_t *)&info->zbc_actual,
FM_EREPORT_PAYLOAD_ZFS_CKSUM_ALGO,
DATA_TYPE_STRING,
info->zbc_checksum_name,
NULL);
if (info->zbc_byteswapped) {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_CKSUM_BYTESWAP,
DATA_TYPE_BOOLEAN, 1,
NULL);
}
}
if (badabd == NULL || goodabd == NULL)
return (eip);
ASSERT3U(nui64s, <=, UINT32_MAX);
ASSERT3U(size, ==, nui64s * sizeof (uint64_t));
ASSERT3U(size, <=, SPA_MAXBLOCKSIZE);
ASSERT3U(size, <=, UINT32_MAX);
good = (const uint64_t *) abd_borrow_buf_copy((abd_t *)goodabd, size);
bad = (const uint64_t *) abd_borrow_buf_copy((abd_t *)badabd, size);
/* build up the range list by comparing the two buffers. */
for (idx = 0; idx < nui64s; idx++) {
if (good[idx] == bad[idx]) {
if (start == -1)
continue;
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zei_add_range(eip, start, idx);
start = -1;
} else {
if (start != -1)
continue;
start = idx;
}
}
if (start != -1)
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zei_add_range(eip, start, idx);
/* See if it will fit in our inline buffers */
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
inline_size = zei_range_total_size(eip);
if (inline_size > ZFM_MAX_INLINE)
no_inline = 1;
/*
* If there is no change and we want to drop if the buffers are
* identical, do so.
*/
if (inline_size == 0 && drop_if_identical) {
kmem_free(eip, sizeof (*eip));
abd_return_buf((abd_t *)goodabd, (void *)good, size);
abd_return_buf((abd_t *)badabd, (void *)bad, size);
return (NULL);
}
/*
* Now walk through the ranges, filling in the details of the
* differences. Also convert our uint64_t-array offsets to byte
* offsets.
*/
for (range = 0; range < eip->zei_range_count; range++) {
size_t start = eip->zei_ranges[range].zr_start;
size_t end = eip->zei_ranges[range].zr_end;
for (idx = start; idx < end; idx++) {
uint64_t set, cleared;
// bits set in bad, but not in good
set = ((~good[idx]) & bad[idx]);
// bits set in good, but not in bad
cleared = (good[idx] & (~bad[idx]));
allset |= set;
allcleared |= cleared;
if (!no_inline) {
ASSERT3U(offset, <, inline_size);
eip->zei_bits_set[offset] = set;
eip->zei_bits_cleared[offset] = cleared;
offset++;
}
update_histogram(set, eip->zei_histogram_set,
&eip->zei_range_sets[range]);
update_histogram(cleared, eip->zei_histogram_cleared,
&eip->zei_range_clears[range]);
}
/* convert to byte offsets */
eip->zei_ranges[range].zr_start *= sizeof (uint64_t);
eip->zei_ranges[range].zr_end *= sizeof (uint64_t);
}
abd_return_buf((abd_t *)goodabd, (void *)good, size);
abd_return_buf((abd_t *)badabd, (void *)bad, size);
eip->zei_allowed_mingap *= sizeof (uint64_t);
inline_size *= sizeof (uint64_t);
/* fill in ereport */
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_BAD_OFFSET_RANGES,
DATA_TYPE_UINT32_ARRAY, 2 * eip->zei_range_count,
(uint32_t *)eip->zei_ranges,
FM_EREPORT_PAYLOAD_ZFS_BAD_RANGE_MIN_GAP,
DATA_TYPE_UINT32, eip->zei_allowed_mingap,
FM_EREPORT_PAYLOAD_ZFS_BAD_RANGE_SETS,
DATA_TYPE_UINT32_ARRAY, eip->zei_range_count, eip->zei_range_sets,
FM_EREPORT_PAYLOAD_ZFS_BAD_RANGE_CLEARS,
DATA_TYPE_UINT32_ARRAY, eip->zei_range_count, eip->zei_range_clears,
NULL);
if (!no_inline) {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_BAD_SET_BITS,
DATA_TYPE_UINT8_ARRAY,
inline_size, (uint8_t *)eip->zei_bits_set,
FM_EREPORT_PAYLOAD_ZFS_BAD_CLEARED_BITS,
DATA_TYPE_UINT8_ARRAY,
inline_size, (uint8_t *)eip->zei_bits_cleared,
NULL);
} else {
fm_payload_set(ereport,
FM_EREPORT_PAYLOAD_ZFS_BAD_SET_HISTOGRAM,
DATA_TYPE_UINT32_ARRAY,
NBBY * sizeof (uint64_t), eip->zei_histogram_set,
FM_EREPORT_PAYLOAD_ZFS_BAD_CLEARED_HISTOGRAM,
DATA_TYPE_UINT32_ARRAY,
NBBY * sizeof (uint64_t), eip->zei_histogram_cleared,
NULL);
}
return (eip);
}
#else
/*ARGSUSED*/
void
zfs_ereport_clear(spa_t *spa, vdev_t *vd)
{
}
#endif
/*
* Make sure our event is still valid for the given zio/vdev/pool. For example,
* we don't want to keep logging events for a faulted or missing vdev.
*/
boolean_t
zfs_ereport_is_valid(const char *subclass, spa_t *spa, vdev_t *vd, zio_t *zio)
{
#ifdef _KERNEL
/*
* If we are doing a spa_tryimport() or in recovery mode,
* ignore errors.
*/
if (spa_load_state(spa) == SPA_LOAD_TRYIMPORT ||
spa_load_state(spa) == SPA_LOAD_RECOVER)
return (B_FALSE);
/*
* If we are in the middle of opening a pool, and the previous attempt
* failed, don't bother logging any new ereports - we're just going to
* get the same diagnosis anyway.
*/
if (spa_load_state(spa) != SPA_LOAD_NONE &&
spa->spa_last_open_failed)
return (B_FALSE);
if (zio != NULL) {
/*
* If this is not a read or write zio, ignore the error. This
* can occur if the DKIOCFLUSHWRITECACHE ioctl fails.
*/
if (zio->io_type != ZIO_TYPE_READ &&
zio->io_type != ZIO_TYPE_WRITE)
return (B_FALSE);
if (vd != NULL) {
/*
* If the vdev has already been marked as failing due
* to a failed probe, then ignore any subsequent I/O
* errors, as the DE will automatically fault the vdev
* on the first such failure. This also catches cases
* where vdev_remove_wanted is set and the device has
* not yet been asynchronously placed into the REMOVED
* state.
*/
if (zio->io_vd == vd && !vdev_accessible(vd, zio))
return (B_FALSE);
/*
* Ignore checksum errors for reads from DTL regions of
* leaf vdevs.
*/
if (zio->io_type == ZIO_TYPE_READ &&
zio->io_error == ECKSUM &&
vd->vdev_ops->vdev_op_leaf &&
vdev_dtl_contains(vd, DTL_MISSING, zio->io_txg, 1))
return (B_FALSE);
}
}
/*
* For probe failure, we want to avoid posting ereports if we've
* already removed the device in the meantime.
*/
if (vd != NULL &&
strcmp(subclass, FM_EREPORT_ZFS_PROBE_FAILURE) == 0 &&
(vd->vdev_remove_wanted || vd->vdev_state == VDEV_STATE_REMOVED))
return (B_FALSE);
/* Ignore bogus delay events (like from ioctls or unqueued IOs) */
if ((strcmp(subclass, FM_EREPORT_ZFS_DELAY) == 0) &&
(zio != NULL) && (!zio->io_timestamp)) {
return (B_FALSE);
}
#endif
return (B_TRUE);
}
/*
* Post an ereport for the given subclass
*
* Returns
* - 0 if an event was posted
* - EINVAL if there was a problem posting event
* - EBUSY if the event was rate limited
* - EALREADY if the event was already posted (duplicate)
*/
int
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
zfs_ereport_post(const char *subclass, spa_t *spa, vdev_t *vd,
const zbookmark_phys_t *zb, zio_t *zio, uint64_t state)
{
int rc = 0;
#ifdef _KERNEL
nvlist_t *ereport = NULL;
nvlist_t *detector = NULL;
if (!zfs_ereport_is_valid(subclass, spa, vd, zio))
return (EINVAL);
if (zfs_ereport_is_duplicate(subclass, spa, vd, zb, zio, 0, 0))
return (SET_ERROR(EALREADY));
if (zfs_is_ratelimiting_event(subclass, vd))
return (SET_ERROR(EBUSY));
if (!zfs_ereport_start(&ereport, &detector, subclass, spa, vd,
zb, zio, state, 0))
return (SET_ERROR(EINVAL)); /* couldn't post event */
if (ereport == NULL)
return (SET_ERROR(EINVAL));
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
/* Cleanup is handled by the callback function */
rc = zfs_zevent_post(ereport, detector, zfs_zevent_post_cb);
2008-11-20 20:01:55 +00:00
#endif
return (rc);
2008-11-20 20:01:55 +00:00
}
/*
* Prepare a checksum ereport
*
* Returns
* - 0 if an event was posted
* - EINVAL if there was a problem posting event
* - EBUSY if the event was rate limited
* - EALREADY if the event was already posted (duplicate)
*/
int
zfs_ereport_start_checksum(spa_t *spa, vdev_t *vd, const zbookmark_phys_t *zb,
Clean up RAIDZ/DRAID ereport code The RAIDZ and DRAID code is responsible for reporting checksum errors on their child vdevs. Checksum errors represent events where a disk returned data or parity that should have been correct, but was not. In other words, these are instances of silent data corruption. The checksum errors show up in the vdev stats (and thus `zpool status`'s CKSUM column), and in the event log (`zpool events`). Note, this is in contrast with the more common "noisy" errors where a disk goes offline, in which case ZFS knows that the disk is bad and doesn't try to read it, or the device returns an error on the requested read or write operation. RAIDZ/DRAID generate checksum errors via three code paths: 1. When RAIDZ/DRAID reconstructs a damaged block, checksum errors are reported on any children whose data was not used during the reconstruction. This is handled in `raidz_reconstruct()`. This is the most common type of RAIDZ/DRAID checksum error. 2. When RAIDZ/DRAID is not able to reconstruct a damaged block, that means that the data has been lost. The zio fails and an error is returned to the consumer (e.g. the read(2) system call). This would happen if, for example, three different disks in a RAIDZ2 group are silently damaged. Since the damage is silent, it isn't possible to know which three disks are damaged, so a checksum error is reported against every child that returned data or parity for this read. (For DRAID, typically only one "group" of children is involved in each io.) This case is handled in `vdev_raidz_cksum_finish()`. This is the next most common type of RAIDZ/DRAID checksum error. 3. If RAIDZ/DRAID is not able to reconstruct a damaged block (like in case 2), but there happens to be additional copies of this block due to "ditto blocks" (i.e. multiple DVA's in this blkptr_t), and one of those copies is good, then RAIDZ/DRAID compares each sector of the data or parity that it retrieved with the good data from the other DVA, and if they differ then it reports a checksum error on this child. This differs from case 2 in that the checksum error is reported on only the subset of children that actually have bad data or parity. This case happens very rarely, since normally only metadata has ditto blocks. If the silent damage is extensive, there will be many instances of case 2, and the pool will likely be unrecoverable. The code for handling case 3 is considerably more complicated than the other cases, for two reasons: 1. It needs to run after the main raidz read logic has completed. The data RAIDZ read needs to be preserved until after the alternate DVA has been read, which necessitates refcounts and callbacks managed by the non-raidz-specific zio layer. 2. It's nontrivial to map the sections of data read by RAIDZ to the correct data. For example, the correct data does not include the parity information, so the parity must be recalculated based on the correct data, and then compared to the parity that was read from the RAIDZ children. Due to the complexity of case 3, the rareness of hitting it, and the minimal benefit it provides above case 2, this commit removes the code for case 3. These types of errors will now be handled the same as case 2, i.e. the checksum error will be reported against all children that returned data or parity. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11735
2021-03-19 23:22:10 +00:00
struct zio *zio, uint64_t offset, uint64_t length, zio_bad_cksum_t *info)
{
zio_cksum_report_t *report;
#ifdef _KERNEL
if (!zfs_ereport_is_valid(FM_EREPORT_ZFS_CHECKSUM, spa, vd, zio))
return (SET_ERROR(EINVAL));
if (zfs_ereport_is_duplicate(FM_EREPORT_ZFS_CHECKSUM, spa, vd, zb, zio,
offset, length))
return (SET_ERROR(EALREADY));
if (zfs_is_ratelimiting_event(FM_EREPORT_ZFS_CHECKSUM, vd))
return (SET_ERROR(EBUSY));
#endif
report = kmem_zalloc(sizeof (*report), KM_SLEEP);
Clean up RAIDZ/DRAID ereport code The RAIDZ and DRAID code is responsible for reporting checksum errors on their child vdevs. Checksum errors represent events where a disk returned data or parity that should have been correct, but was not. In other words, these are instances of silent data corruption. The checksum errors show up in the vdev stats (and thus `zpool status`'s CKSUM column), and in the event log (`zpool events`). Note, this is in contrast with the more common "noisy" errors where a disk goes offline, in which case ZFS knows that the disk is bad and doesn't try to read it, or the device returns an error on the requested read or write operation. RAIDZ/DRAID generate checksum errors via three code paths: 1. When RAIDZ/DRAID reconstructs a damaged block, checksum errors are reported on any children whose data was not used during the reconstruction. This is handled in `raidz_reconstruct()`. This is the most common type of RAIDZ/DRAID checksum error. 2. When RAIDZ/DRAID is not able to reconstruct a damaged block, that means that the data has been lost. The zio fails and an error is returned to the consumer (e.g. the read(2) system call). This would happen if, for example, three different disks in a RAIDZ2 group are silently damaged. Since the damage is silent, it isn't possible to know which three disks are damaged, so a checksum error is reported against every child that returned data or parity for this read. (For DRAID, typically only one "group" of children is involved in each io.) This case is handled in `vdev_raidz_cksum_finish()`. This is the next most common type of RAIDZ/DRAID checksum error. 3. If RAIDZ/DRAID is not able to reconstruct a damaged block (like in case 2), but there happens to be additional copies of this block due to "ditto blocks" (i.e. multiple DVA's in this blkptr_t), and one of those copies is good, then RAIDZ/DRAID compares each sector of the data or parity that it retrieved with the good data from the other DVA, and if they differ then it reports a checksum error on this child. This differs from case 2 in that the checksum error is reported on only the subset of children that actually have bad data or parity. This case happens very rarely, since normally only metadata has ditto blocks. If the silent damage is extensive, there will be many instances of case 2, and the pool will likely be unrecoverable. The code for handling case 3 is considerably more complicated than the other cases, for two reasons: 1. It needs to run after the main raidz read logic has completed. The data RAIDZ read needs to be preserved until after the alternate DVA has been read, which necessitates refcounts and callbacks managed by the non-raidz-specific zio layer. 2. It's nontrivial to map the sections of data read by RAIDZ to the correct data. For example, the correct data does not include the parity information, so the parity must be recalculated based on the correct data, and then compared to the parity that was read from the RAIDZ children. Due to the complexity of case 3, the rareness of hitting it, and the minimal benefit it provides above case 2, this commit removes the code for case 3. These types of errors will now be handled the same as case 2, i.e. the checksum error will be reported against all children that returned data or parity. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11735
2021-03-19 23:22:10 +00:00
zio_vsd_default_cksum_report(zio, report);
/* copy the checksum failure information if it was provided */
if (info != NULL) {
report->zcr_ckinfo = kmem_zalloc(sizeof (*info), KM_SLEEP);
bcopy(info, report->zcr_ckinfo, sizeof (*info));
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
report->zcr_sector = 1ULL << vd->vdev_top->vdev_ashift;
report->zcr_align =
vdev_psize_to_asize(vd->vdev_top, report->zcr_sector);
report->zcr_length = length;
#ifdef _KERNEL
(void) zfs_ereport_start(&report->zcr_ereport, &report->zcr_detector,
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
FM_EREPORT_ZFS_CHECKSUM, spa, vd, zb, zio, offset, length);
if (report->zcr_ereport == NULL) {
zfs_ereport_free_checksum(report);
return (0);
}
#endif
mutex_enter(&spa->spa_errlist_lock);
report->zcr_next = zio->io_logical->io_cksum_report;
zio->io_logical->io_cksum_report = report;
mutex_exit(&spa->spa_errlist_lock);
return (0);
}
void
zfs_ereport_finish_checksum(zio_cksum_report_t *report, const abd_t *good_data,
const abd_t *bad_data, boolean_t drop_if_identical)
{
#ifdef _KERNEL
zfs_ecksum_info_t *info;
info = annotate_ecksum(report->zcr_ereport, report->zcr_ckinfo,
good_data, bad_data, report->zcr_length, drop_if_identical);
if (info != NULL)
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
zfs_zevent_post(report->zcr_ereport,
report->zcr_detector, zfs_zevent_post_cb);
else
zfs_zevent_post_cb(report->zcr_ereport, report->zcr_detector);
report->zcr_ereport = report->zcr_detector = NULL;
if (info != NULL)
kmem_free(info, sizeof (*info));
#endif
}
void
zfs_ereport_free_checksum(zio_cksum_report_t *rpt)
{
#ifdef _KERNEL
if (rpt->zcr_ereport != NULL) {
fm_nvlist_destroy(rpt->zcr_ereport,
FM_NVA_FREE);
fm_nvlist_destroy(rpt->zcr_detector,
FM_NVA_FREE);
}
#endif
rpt->zcr_free(rpt->zcr_cbdata, rpt->zcr_cbinfo);
if (rpt->zcr_ckinfo != NULL)
kmem_free(rpt->zcr_ckinfo, sizeof (*rpt->zcr_ckinfo));
kmem_free(rpt, sizeof (*rpt));
}
/*
* Post a checksum ereport
*
* Returns
* - 0 if an event was posted
* - EINVAL if there was a problem posting event
* - EBUSY if the event was rate limited
* - EALREADY if the event was already posted (duplicate)
*/
int
zfs_ereport_post_checksum(spa_t *spa, vdev_t *vd, const zbookmark_phys_t *zb,
struct zio *zio, uint64_t offset, uint64_t length,
const abd_t *good_data, const abd_t *bad_data, zio_bad_cksum_t *zbc)
{
int rc = 0;
#ifdef _KERNEL
nvlist_t *ereport = NULL;
nvlist_t *detector = NULL;
zfs_ecksum_info_t *info;
if (!zfs_ereport_is_valid(FM_EREPORT_ZFS_CHECKSUM, spa, vd, zio))
return (SET_ERROR(EINVAL));
if (zfs_ereport_is_duplicate(FM_EREPORT_ZFS_CHECKSUM, spa, vd, zb, zio,
offset, length))
return (SET_ERROR(EALREADY));
if (zfs_is_ratelimiting_event(FM_EREPORT_ZFS_CHECKSUM, vd))
return (SET_ERROR(EBUSY));
if (!zfs_ereport_start(&ereport, &detector, FM_EREPORT_ZFS_CHECKSUM,
spa, vd, zb, zio, offset, length) || (ereport == NULL)) {
return (SET_ERROR(EINVAL));
}
info = annotate_ecksum(ereport, zbc, good_data, bad_data, length,
B_FALSE);
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
if (info != NULL) {
rc = zfs_zevent_post(ereport, detector, zfs_zevent_post_cb);
kmem_free(info, sizeof (*info));
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
}
#endif
return (rc);
}
/*
* The 'sysevent.fs.zfs.*' events are signals posted to notify user space of
* change in the pool. All sysevents are listed in sys/sysevent/eventdefs.h
* and are designed to be consumed by the ZFS Event Daemon (ZED). For
* additional details refer to the zed(8) man page.
*/
nvlist_t *
zfs_event_create(spa_t *spa, vdev_t *vd, const char *type, const char *name,
nvlist_t *aux)
2008-11-20 20:01:55 +00:00
{
nvlist_t *resource = NULL;
2008-11-20 20:01:55 +00:00
#ifdef _KERNEL
char class[64];
if (spa_load_state(spa) == SPA_LOAD_TRYIMPORT)
return (NULL);
2008-11-20 20:01:55 +00:00
if ((resource = fm_nvlist_create(NULL)) == NULL)
return (NULL);
2008-11-20 20:01:55 +00:00
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-27 22:29:15 +00:00
(void) snprintf(class, sizeof (class), "%s.%s.%s", type,
2008-11-20 20:01:55 +00:00
ZFS_ERROR_CLASS, name);
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
VERIFY0(nvlist_add_uint8(resource, FM_VERSION, FM_RSRC_VERSION));
VERIFY0(nvlist_add_string(resource, FM_CLASS, class));
VERIFY0(nvlist_add_string(resource,
FM_EREPORT_PAYLOAD_ZFS_POOL, spa_name(spa)));
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
VERIFY0(nvlist_add_uint64(resource,
FM_EREPORT_PAYLOAD_ZFS_POOL_GUID, spa_guid(spa)));
VERIFY0(nvlist_add_uint64(resource,
FM_EREPORT_PAYLOAD_ZFS_POOL_STATE, spa_state(spa)));
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
VERIFY0(nvlist_add_int32(resource,
FM_EREPORT_PAYLOAD_ZFS_POOL_CONTEXT, spa_load_state(spa)));
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
if (vd) {
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
VERIFY0(nvlist_add_uint64(resource,
FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID, vd->vdev_guid));
VERIFY0(nvlist_add_uint64(resource,
FM_EREPORT_PAYLOAD_ZFS_VDEV_STATE, vd->vdev_state));
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-27 22:29:15 +00:00
if (vd->vdev_path != NULL)
VERIFY0(nvlist_add_string(resource,
FM_EREPORT_PAYLOAD_ZFS_VDEV_PATH, vd->vdev_path));
if (vd->vdev_devid != NULL)
VERIFY0(nvlist_add_string(resource,
FM_EREPORT_PAYLOAD_ZFS_VDEV_DEVID, vd->vdev_devid));
if (vd->vdev_fru != NULL)
VERIFY0(nvlist_add_string(resource,
FM_EREPORT_PAYLOAD_ZFS_VDEV_FRU, vd->vdev_fru));
if (vd->vdev_enc_sysfs_path != NULL)
VERIFY0(nvlist_add_string(resource,
FM_EREPORT_PAYLOAD_ZFS_VDEV_ENC_SYSFS_PATH,
vd->vdev_enc_sysfs_path));
}
/* also copy any optional payload data */
if (aux) {
nvpair_t *elem = NULL;
while ((elem = nvlist_next_nvpair(aux, elem)) != NULL)
(void) nvlist_add_nvpair(resource, elem);
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
}
2008-11-20 20:01:55 +00:00
#endif
return (resource);
}
static void
zfs_post_common(spa_t *spa, vdev_t *vd, const char *type, const char *name,
nvlist_t *aux)
{
#ifdef _KERNEL
nvlist_t *resource;
resource = zfs_event_create(spa, vd, type, name, aux);
if (resource)
zfs_zevent_post(resource, NULL, zfs_zevent_post_cb);
2008-11-20 20:01:55 +00:00
#endif
}
/*
* The 'resource.fs.zfs.removed' event is an internal signal that the given vdev
* has been removed from the system. This will cause the DE to ignore any
* recent I/O errors, inferring that they are due to the asynchronous device
* removal.
*/
void
zfs_post_remove(spa_t *spa, vdev_t *vd)
{
zfs_post_common(spa, vd, FM_RSRC_CLASS, FM_RESOURCE_REMOVED, NULL);
2008-11-20 20:01:55 +00:00
}
/*
* The 'resource.fs.zfs.autoreplace' event is an internal signal that the pool
* has the 'autoreplace' property set, and therefore any broken vdevs will be
* handled by higher level logic, and no vdev fault should be generated.
*/
void
zfs_post_autoreplace(spa_t *spa, vdev_t *vd)
{
zfs_post_common(spa, vd, FM_RSRC_CLASS, FM_RESOURCE_AUTOREPLACE, NULL);
2008-11-20 20:01:55 +00:00
}
/*
* The 'resource.fs.zfs.statechange' event is an internal signal that the
* given vdev has transitioned its state to DEGRADED or HEALTHY. This will
* cause the retire agent to repair any outstanding fault management cases
* open because the device was not found (fault.fs.zfs.device).
*/
void
zfs_post_state_change(spa_t *spa, vdev_t *vd, uint64_t laststate)
{
#ifdef _KERNEL
nvlist_t *aux;
/*
* Add optional supplemental keys to payload
*/
aux = fm_nvlist_create(NULL);
if (vd && aux) {
if (vd->vdev_physpath) {
(void) nvlist_add_string(aux,
FM_EREPORT_PAYLOAD_ZFS_VDEV_PHYSPATH,
vd->vdev_physpath);
}
if (vd->vdev_enc_sysfs_path) {
(void) nvlist_add_string(aux,
FM_EREPORT_PAYLOAD_ZFS_VDEV_ENC_SYSFS_PATH,
vd->vdev_enc_sysfs_path);
}
(void) nvlist_add_uint64(aux,
FM_EREPORT_PAYLOAD_ZFS_VDEV_LASTSTATE, laststate);
}
zfs_post_common(spa, vd, FM_RSRC_CLASS, FM_RESOURCE_STATECHANGE,
aux);
if (aux)
fm_nvlist_destroy(aux, FM_NVA_FREE);
#endif
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-27 22:29:15 +00:00
}
#ifdef _KERNEL
void
zfs_ereport_init(void)
{
mutex_init(&recent_events_lock, NULL, MUTEX_DEFAULT, NULL);
list_create(&recent_events_list, sizeof (recent_events_node_t),
offsetof(recent_events_node_t, re_list_link));
avl_create(&recent_events_tree, recent_events_compare,
sizeof (recent_events_node_t), offsetof(recent_events_node_t,
re_tree_link));
}
/*
* This 'early' fini needs to run before zfs_fini() which on Linux waits
* for the system_delay_taskq to drain.
*/
void
zfs_ereport_taskq_fini(void)
{
mutex_enter(&recent_events_lock);
if (recent_events_cleaner_tqid != 0) {
taskq_cancel_id(system_delay_taskq, recent_events_cleaner_tqid);
recent_events_cleaner_tqid = 0;
}
mutex_exit(&recent_events_lock);
}
void
zfs_ereport_fini(void)
{
recent_events_node_t *entry;
while ((entry = list_head(&recent_events_list)) != NULL) {
avl_remove(&recent_events_tree, entry);
list_remove(&recent_events_list, entry);
kmem_free(entry, sizeof (*entry));
}
avl_destroy(&recent_events_tree);
list_destroy(&recent_events_list);
mutex_destroy(&recent_events_lock);
}
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
EXPORT_SYMBOL(zfs_ereport_post);
EXPORT_SYMBOL(zfs_ereport_is_valid);
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
EXPORT_SYMBOL(zfs_ereport_post_checksum);
EXPORT_SYMBOL(zfs_post_remove);
EXPORT_SYMBOL(zfs_post_autoreplace);
EXPORT_SYMBOL(zfs_post_state_change);
ZFS_MODULE_PARAM(zfs_zevent, zfs_zevent_, retain_max, UINT, ZMOD_RW,
"Maximum recent zevents records to retain for duplicate checking");
ZFS_MODULE_PARAM(zfs_zevent, zfs_zevent_, retain_expire_secs, UINT, ZMOD_RW,
"Expiration time for recent zevents records");
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
#endif /* _KERNEL */