zfs/lib/libzpool/kernel.c

1438 lines
28 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
* Copyright (c) 2012, 2018 by Delphix. All rights reserved.
* Copyright (c) 2016 Actifio, Inc. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#include <assert.h>
#include <fcntl.h>
#include <libgen.h>
2008-11-20 20:01:55 +00:00
#include <poll.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <libzutil.h>
#include <sys/crypto/icp.h>
2008-11-20 20:01:55 +00:00
#include <sys/processor.h>
#include <sys/rrwlock.h>
#include <sys/spa.h>
#include <sys/stat.h>
2009-02-18 20:51:31 +00:00
#include <sys/systeminfo.h>
#include <sys/time.h>
#include <sys/utsname.h>
#include <sys/zfs_context.h>
#include <sys/zfs_onexit.h>
#include <sys/zfs_vfsops.h>
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
#include <sys/zstd/zstd.h>
#include <sys/zvol.h>
#include <zfs_fletcher.h>
#include <zlib.h>
2008-11-20 20:01:55 +00:00
/*
* Emulation of kernel services in userland.
*/
uint64_t physmem;
uint32_t hostid;
struct utsname hw_utsname;
2008-11-20 20:01:55 +00:00
/* If set, all blocks read will be copied to the specified directory. */
char *vn_dumpdir = NULL;
/* this only exists to have its address taken */
struct proc p0;
2008-11-20 20:01:55 +00:00
/*
* =========================================================================
* threads
* =========================================================================
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
*
* TS_STACK_MIN is dictated by the minimum allowed pthread stack size. While
* TS_STACK_MAX is somewhat arbitrary, it was selected to be large enough for
* the expected stack depth while small enough to avoid exhausting address
* space with high thread counts.
2008-11-20 20:01:55 +00:00
*/
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
#define TS_STACK_MIN MAX(PTHREAD_STACK_MIN, 32768)
#define TS_STACK_MAX (256 * 1024)
struct zk_thread_wrapper {
void (*func)(void *);
void *arg;
};
static void *
zk_thread_wrapper(void *arg)
{
struct zk_thread_wrapper ztw;
memcpy(&ztw, arg, sizeof (ztw));
free(arg);
ztw.func(ztw.arg);
return (NULL);
}
kthread_t *
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
zk_thread_create(void (*func)(void *), void *arg, size_t stksize, int state)
{
pthread_attr_t attr;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
pthread_t tid;
char *stkstr;
struct zk_thread_wrapper *ztw;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
int detachstate = PTHREAD_CREATE_DETACHED;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_attr_init(&attr));
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
if (state & TS_JOINABLE)
detachstate = PTHREAD_CREATE_JOINABLE;
VERIFY0(pthread_attr_setdetachstate(&attr, detachstate));
/*
* We allow the default stack size in user space to be specified by
* setting the ZFS_STACK_SIZE environment variable. This allows us
* the convenience of observing and debugging stack overruns in
* user space. Explicitly specified stack sizes will be honored.
* The usage of ZFS_STACK_SIZE is discussed further in the
* ENVIRONMENT VARIABLES sections of the ztest(1) man page.
*/
if (stksize == 0) {
stkstr = getenv("ZFS_STACK_SIZE");
if (stkstr == NULL)
stksize = TS_STACK_MAX;
else
stksize = MAX(atoi(stkstr), TS_STACK_MIN);
}
VERIFY3S(stksize, >, 0);
stksize = P2ROUNDUP(MAX(stksize, TS_STACK_MIN), PAGESIZE);
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
/*
* If this ever fails, it may be because the stack size is not a
* multiple of system page size.
*/
VERIFY0(pthread_attr_setstacksize(&attr, stksize));
VERIFY0(pthread_attr_setguardsize(&attr, PAGESIZE));
VERIFY(ztw = malloc(sizeof (*ztw)));
ztw->func = func;
ztw->arg = arg;
VERIFY0(pthread_create(&tid, &attr, zk_thread_wrapper, ztw));
VERIFY0(pthread_attr_destroy(&attr));
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
return ((void *)(uintptr_t)tid);
2008-11-20 20:01:55 +00:00
}
/*
* =========================================================================
* kstats
* =========================================================================
*/
kstat_t *
kstat_create(const char *module, int instance, const char *name,
const char *class, uchar_t type, ulong_t ndata, uchar_t ks_flag)
2008-11-20 20:01:55 +00:00
{
(void) module, (void) instance, (void) name, (void) class, (void) type,
(void) ndata, (void) ks_flag;
2008-11-20 20:01:55 +00:00
return (NULL);
}
void
kstat_install(kstat_t *ksp)
{
(void) ksp;
}
2008-11-20 20:01:55 +00:00
void
kstat_delete(kstat_t *ksp)
{
(void) ksp;
}
2008-11-20 20:01:55 +00:00
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
void
kstat_set_raw_ops(kstat_t *ksp,
int (*headers)(char *buf, size_t size),
int (*data)(char *buf, size_t size, void *data),
void *(*addr)(kstat_t *ksp, loff_t index))
{
(void) ksp, (void) headers, (void) data, (void) addr;
}
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
2008-11-20 20:01:55 +00:00
/*
* =========================================================================
* mutexes
* =========================================================================
*/
2008-11-20 20:01:55 +00:00
void
mutex_init(kmutex_t *mp, char *name, int type, void *cookie)
2008-11-20 20:01:55 +00:00
{
(void) name, (void) type, (void) cookie;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_mutex_init(&mp->m_lock, NULL));
memset(&mp->m_owner, 0, sizeof (pthread_t));
2008-11-20 20:01:55 +00:00
}
void
mutex_destroy(kmutex_t *mp)
2008-11-20 20:01:55 +00:00
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_mutex_destroy(&mp->m_lock));
2008-11-20 20:01:55 +00:00
}
void
mutex_enter(kmutex_t *mp)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_mutex_lock(&mp->m_lock));
mp->m_owner = pthread_self();
2008-11-20 20:01:55 +00:00
}
int
mutex_tryenter(kmutex_t *mp)
{
int error = pthread_mutex_trylock(&mp->m_lock);
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
if (error == 0) {
mp->m_owner = pthread_self();
2008-11-20 20:01:55 +00:00
return (1);
} else {
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY3S(error, ==, EBUSY);
2008-11-20 20:01:55 +00:00
return (0);
}
}
void
mutex_exit(kmutex_t *mp)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
memset(&mp->m_owner, 0, sizeof (pthread_t));
VERIFY0(pthread_mutex_unlock(&mp->m_lock));
}
2008-11-20 20:01:55 +00:00
/*
* =========================================================================
* rwlocks
* =========================================================================
*/
2008-11-20 20:01:55 +00:00
void
rw_init(krwlock_t *rwlp, char *name, int type, void *arg)
{
(void) name, (void) type, (void) arg;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_rwlock_init(&rwlp->rw_lock, NULL));
rwlp->rw_readers = 0;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
rwlp->rw_owner = 0;
2008-11-20 20:01:55 +00:00
}
void
rw_destroy(krwlock_t *rwlp)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_rwlock_destroy(&rwlp->rw_lock));
2008-11-20 20:01:55 +00:00
}
void
rw_enter(krwlock_t *rwlp, krw_t rw)
{
if (rw == RW_READER) {
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_rwlock_rdlock(&rwlp->rw_lock));
atomic_inc_uint(&rwlp->rw_readers);
} else {
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_rwlock_wrlock(&rwlp->rw_lock));
rwlp->rw_owner = pthread_self();
}
2008-11-20 20:01:55 +00:00
}
void
rw_exit(krwlock_t *rwlp)
{
if (RW_READ_HELD(rwlp))
atomic_dec_uint(&rwlp->rw_readers);
else
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
rwlp->rw_owner = 0;
2008-11-20 20:01:55 +00:00
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_rwlock_unlock(&rwlp->rw_lock));
2008-11-20 20:01:55 +00:00
}
int
rw_tryenter(krwlock_t *rwlp, krw_t rw)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
int error;
2008-11-20 20:01:55 +00:00
if (rw == RW_READER)
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
error = pthread_rwlock_tryrdlock(&rwlp->rw_lock);
2008-11-20 20:01:55 +00:00
else
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
error = pthread_rwlock_trywrlock(&rwlp->rw_lock);
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
if (error == 0) {
if (rw == RW_READER)
atomic_inc_uint(&rwlp->rw_readers);
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
else
rwlp->rw_owner = pthread_self();
2008-11-20 20:01:55 +00:00
return (1);
}
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY3S(error, ==, EBUSY);
2008-11-20 20:01:55 +00:00
return (0);
}
OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
2016-07-22 14:39:36 +00:00
uint32_t
zone_get_hostid(void *zonep)
{
/*
* We're emulating the system's hostid in userland.
*/
(void) zonep;
return (hostid);
OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
2016-07-22 14:39:36 +00:00
}
2008-11-20 20:01:55 +00:00
int
rw_tryupgrade(krwlock_t *rwlp)
{
(void) rwlp;
2008-11-20 20:01:55 +00:00
return (0);
}
/*
* =========================================================================
* condition variables
* =========================================================================
*/
2008-11-20 20:01:55 +00:00
void
cv_init(kcondvar_t *cv, char *name, int type, void *arg)
{
(void) name, (void) type, (void) arg;
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_cond_init(cv, NULL));
2008-11-20 20:01:55 +00:00
}
void
cv_destroy(kcondvar_t *cv)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_cond_destroy(cv));
2008-11-20 20:01:55 +00:00
}
void
cv_wait(kcondvar_t *cv, kmutex_t *mp)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
memset(&mp->m_owner, 0, sizeof (pthread_t));
VERIFY0(pthread_cond_wait(cv, &mp->m_lock));
mp->m_owner = pthread_self();
2008-11-20 20:01:55 +00:00
}
OpenZFS 9425 - channel programs can be interrupted Problem Statement ================= ZFS Channel program scripts currently require a timeout, so that hung or long-running scripts return a timeout error instead of causing ZFS to get wedged. This limit can currently be set up to 100 million Lua instructions. Even with a limit in place, it would be desirable to have a sys admin (support engineer) be able to cancel a script that is taking a long time. Proposed Solution ================= Make it possible to abort a channel program by sending an interrupt signal.In the underlying txg_wait_sync function, switch the cv_wait to a cv_wait_sig to catch the signal. Once a signal is encountered, the dsl_sync_task function can install a Lua hook that will get called before the Lua interpreter executes a new line of code. The dsl_sync_task can resume with a standard txg_wait_sync call and wait for the txg to complete. Meanwhile, the hook will abort the script and indicate that the channel program was canceled. The kernel returns a EINTR to indicate that the channel program run was canceled. Porting notes: Added missing return value from cv_wait_sig() Authored by: Don Brady <don.brady@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Sara Hartse <sara.hartse@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com> Signed-off-by: Don Brady <don.brady@delphix.com> OpenZFS-issue: https://www.illumos.org/issues/9425 OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/d0cb1fb926 Closes #8904
2019-06-22 23:51:46 +00:00
int
cv_wait_sig(kcondvar_t *cv, kmutex_t *mp)
{
cv_wait(cv, mp);
return (1);
}
int
2008-11-20 20:01:55 +00:00
cv_timedwait(kcondvar_t *cv, kmutex_t *mp, clock_t abstime)
{
int error;
struct timeval tv;
struct timespec ts;
2008-11-20 20:01:55 +00:00
clock_t delta;
delta = abstime - ddi_get_lbolt();
2008-11-20 20:01:55 +00:00
if (delta <= 0)
return (-1);
VERIFY(gettimeofday(&tv, NULL) == 0);
ts.tv_sec = tv.tv_sec + delta / hz;
ts.tv_nsec = tv.tv_usec * NSEC_PER_USEC + (delta % hz) * (NANOSEC / hz);
if (ts.tv_nsec >= NANOSEC) {
ts.tv_sec++;
ts.tv_nsec -= NANOSEC;
}
2008-11-20 20:01:55 +00:00
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
memset(&mp->m_owner, 0, sizeof (pthread_t));
error = pthread_cond_timedwait(cv, &mp->m_lock, &ts);
mp->m_owner = pthread_self();
2008-11-20 20:01:55 +00:00
if (error == ETIMEDOUT)
2008-11-20 20:01:55 +00:00
return (-1);
VERIFY0(error);
2008-11-20 20:01:55 +00:00
return (1);
}
int
cv_timedwait_hires(kcondvar_t *cv, kmutex_t *mp, hrtime_t tim, hrtime_t res,
int flag)
{
(void) res;
int error;
struct timeval tv;
struct timespec ts;
hrtime_t delta;
ASSERT(flag == 0 || flag == CALLOUT_FLAG_ABSOLUTE);
delta = tim;
if (flag & CALLOUT_FLAG_ABSOLUTE)
delta -= gethrtime();
if (delta <= 0)
return (-1);
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(gettimeofday(&tv, NULL));
ts.tv_sec = tv.tv_sec + delta / NANOSEC;
ts.tv_nsec = tv.tv_usec * NSEC_PER_USEC + (delta % NANOSEC);
if (ts.tv_nsec >= NANOSEC) {
ts.tv_sec++;
ts.tv_nsec -= NANOSEC;
}
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
memset(&mp->m_owner, 0, sizeof (pthread_t));
error = pthread_cond_timedwait(cv, &mp->m_lock, &ts);
mp->m_owner = pthread_self();
if (error == ETIMEDOUT)
return (-1);
VERIFY0(error);
return (1);
}
2008-11-20 20:01:55 +00:00
void
cv_signal(kcondvar_t *cv)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_cond_signal(cv));
2008-11-20 20:01:55 +00:00
}
void
cv_broadcast(kcondvar_t *cv)
{
Simplify threads, mutexs, cvs and rwlocks * Simplify threads, mutexs, cvs and rwlocks * Update the zk_thread_create() function to use the same trick as Illumos. Specifically, cast the new pthread_t to a void pointer and return that as the kthread_t *. This avoids the issues associated with managing a wrapper structure and is safe as long as the callers never attempt to dereference it. * Update all function prototypes passed to pthread_create() to match the expected prototype. We were getting away this with before since the function were explicitly cast. * Replaced direct zk_thread_create() calls with thread_create() for code consistency. All consumers of libzpool now use the proper wrappers. * The mutex_held() calls were converted to MUTEX_HELD(). * Removed all mutex_owner() calls and retired the interface. Instead use MUTEX_HELD() which provides the same information and allows the implementation details to be hidden. In this case the use of the pthread_equals() function. * The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had any non essential fields removed. In the case of kthread_t and kcondvar_t they could be directly typedef'd to pthread_t and pthread_cond_t respectively. * Removed all extra ASSERTS from the thread, mutex, rwlock, and cv wrapper functions. In practice, pthreads already provides the vast majority of checks as long as we check the return code. Removing this code from our wrappers help readability. * Added TS_JOINABLE state flag to pass to request a joinable rather than detached thread. This isn't a standard thread_create() state but it's the least invasive way to pass this information and is only used by ztest. TEST_ZTEST_TIMEOUT=3600 Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4547 Closes #5503 Closes #5523 Closes #6377 Closes #6495
2017-08-11 15:51:44 +00:00
VERIFY0(pthread_cond_broadcast(cv));
2008-11-20 20:01:55 +00:00
}
/*
* =========================================================================
* procfs list
* =========================================================================
*/
void
seq_printf(struct seq_file *m, const char *fmt, ...)
{
(void) m, (void) fmt;
}
void
procfs_list_install(const char *module,
const char *submodule,
const char *name,
mode_t mode,
procfs_list_t *procfs_list,
int (*show)(struct seq_file *f, void *p),
int (*show_header)(struct seq_file *f),
int (*clear)(procfs_list_t *procfs_list),
size_t procfs_list_node_off)
{
(void) module, (void) submodule, (void) name, (void) mode, (void) show,
(void) show_header, (void) clear;
mutex_init(&procfs_list->pl_lock, NULL, MUTEX_DEFAULT, NULL);
list_create(&procfs_list->pl_list,
procfs_list_node_off + sizeof (procfs_list_node_t),
procfs_list_node_off + offsetof(procfs_list_node_t, pln_link));
procfs_list->pl_next_id = 1;
procfs_list->pl_node_offset = procfs_list_node_off;
}
void
procfs_list_uninstall(procfs_list_t *procfs_list)
{
(void) procfs_list;
}
void
procfs_list_destroy(procfs_list_t *procfs_list)
{
ASSERT(list_is_empty(&procfs_list->pl_list));
list_destroy(&procfs_list->pl_list);
mutex_destroy(&procfs_list->pl_lock);
}
#define NODE_ID(procfs_list, obj) \
(((procfs_list_node_t *)(((char *)obj) + \
(procfs_list)->pl_node_offset))->pln_id)
void
procfs_list_add(procfs_list_t *procfs_list, void *p)
{
ASSERT(MUTEX_HELD(&procfs_list->pl_lock));
NODE_ID(procfs_list, p) = procfs_list->pl_next_id++;
list_insert_tail(&procfs_list->pl_list, p);
}
2008-11-20 20:01:55 +00:00
/*
* =========================================================================
* vnode operations
* =========================================================================
*/
2008-11-20 20:01:55 +00:00
/*
* =========================================================================
* Figure out which debugging statements to print
* =========================================================================
*/
static char *dprintf_string;
static int dprintf_print_all;
int
dprintf_find_string(const char *string)
{
char *tmp_str = dprintf_string;
int len = strlen(string);
/*
* Find out if this is a string we want to print.
* String format: file1.c,function_name1,file2.c,file3.c
*/
while (tmp_str != NULL) {
if (strncmp(tmp_str, string, len) == 0 &&
(tmp_str[len] == ',' || tmp_str[len] == '\0'))
return (1);
tmp_str = strchr(tmp_str, ',');
if (tmp_str != NULL)
tmp_str++; /* Get rid of , */
}
return (0);
}
void
dprintf_setup(int *argc, char **argv)
{
int i, j;
/*
* Debugging can be specified two ways: by setting the
* environment variable ZFS_DEBUG, or by including a
* "debug=..." argument on the command line. The command
* line setting overrides the environment variable.
*/
for (i = 1; i < *argc; i++) {
int len = strlen("debug=");
/* First look for a command line argument */
if (strncmp("debug=", argv[i], len) == 0) {
dprintf_string = argv[i] + len;
/* Remove from args */
for (j = i; j < *argc; j++)
argv[j] = argv[j+1];
argv[j] = NULL;
(*argc)--;
}
}
if (dprintf_string == NULL) {
/* Look for ZFS_DEBUG environment variable */
dprintf_string = getenv("ZFS_DEBUG");
}
/*
* Are we just turning on all debugging?
*/
if (dprintf_find_string("on"))
dprintf_print_all = 1;
if (dprintf_string != NULL)
zfs_flags |= ZFS_DEBUG_DPRINTF;
2008-11-20 20:01:55 +00:00
}
/*
* =========================================================================
* debug printfs
* =========================================================================
*/
void
__dprintf(boolean_t dprint, const char *file, const char *func,
int line, const char *fmt, ...)
2008-11-20 20:01:55 +00:00
{
/* Get rid of annoying "../common/" prefix to filename. */
const char *newfile = zfs_basename(file);
2008-11-20 20:01:55 +00:00
va_list adx;
if (dprint) {
/* dprintf messages are printed immediately */
if (!dprintf_print_all &&
!dprintf_find_string(newfile) &&
!dprintf_find_string(func))
return;
2008-11-20 20:01:55 +00:00
/* Print out just the function name if requested */
flockfile(stdout);
if (dprintf_find_string("pid"))
(void) printf("%d ", getpid());
if (dprintf_find_string("tid"))
(void) printf("%ju ",
(uintmax_t)(uintptr_t)pthread_self());
2008-11-20 20:01:55 +00:00
if (dprintf_find_string("cpu"))
(void) printf("%u ", getcpuid());
if (dprintf_find_string("time"))
(void) printf("%llu ", gethrtime());
if (dprintf_find_string("long"))
(void) printf("%s, line %d: ", newfile, line);
(void) printf("dprintf: %s: ", func);
2008-11-20 20:01:55 +00:00
va_start(adx, fmt);
(void) vprintf(fmt, adx);
va_end(adx);
funlockfile(stdout);
} else {
/* zfs_dbgmsg is logged for dumping later */
size_t size;
char *buf;
int i;
size = 1024;
buf = umem_alloc(size, UMEM_NOFAIL);
i = snprintf(buf, size, "%s:%d:%s(): ", newfile, line, func);
if (i < size) {
va_start(adx, fmt);
(void) vsnprintf(buf + i, size - i, fmt, adx);
va_end(adx);
}
__zfs_dbgmsg(buf);
umem_free(buf, size);
2008-11-20 20:01:55 +00:00
}
}
/*
* =========================================================================
* cmn_err() and panic()
* =========================================================================
*/
static char ce_prefix[CE_IGNORE][10] = { "", "NOTICE: ", "WARNING: ", "" };
static char ce_suffix[CE_IGNORE][2] = { "", "\n", "\n", "" };
__attribute__((noreturn)) void
2008-11-20 20:01:55 +00:00
vpanic(const char *fmt, va_list adx)
{
(void) fprintf(stderr, "error: ");
(void) vfprintf(stderr, fmt, adx);
(void) fprintf(stderr, "\n");
abort(); /* think of it as a "user-level crash dump" */
}
__attribute__((noreturn)) void
2008-11-20 20:01:55 +00:00
panic(const char *fmt, ...)
{
va_list adx;
va_start(adx, fmt);
vpanic(fmt, adx);
va_end(adx);
}
void
vcmn_err(int ce, const char *fmt, va_list adx)
{
if (ce == CE_PANIC)
vpanic(fmt, adx);
if (ce != CE_NOTE) { /* suppress noise in userland stress testing */
(void) fprintf(stderr, "%s", ce_prefix[ce]);
(void) vfprintf(stderr, fmt, adx);
(void) fprintf(stderr, "%s", ce_suffix[ce]);
}
}
void
cmn_err(int ce, const char *fmt, ...)
{
va_list adx;
va_start(adx, fmt);
vcmn_err(ce, fmt, adx);
va_end(adx);
}
/*
* =========================================================================
* misc routines
* =========================================================================
*/
void
delay(clock_t ticks)
{
(void) poll(0, 0, ticks * (1000 / hz));
2008-11-20 20:01:55 +00:00
}
/*
* Find highest one bit set.
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-09 22:31:08 +00:00
* Returns bit number + 1 of highest bit that is set, otherwise returns 0.
* The __builtin_clzll() function is supported by both GCC and Clang.
2008-11-20 20:01:55 +00:00
*/
int
highbit64(uint64_t i)
2008-11-20 20:01:55 +00:00
{
if (i == 0)
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-09 22:31:08 +00:00
return (0);
return (NBBY * sizeof (uint64_t) - __builtin_clzll(i));
2008-11-20 20:01:55 +00:00
}
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <hutter2@llnl.gov Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4433
2016-02-29 18:05:23 +00:00
/*
* Find lowest one bit set.
* Returns bit number + 1 of lowest bit that is set, otherwise returns 0.
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-09 22:31:08 +00:00
* The __builtin_ffsll() function is supported by both GCC and Clang.
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <hutter2@llnl.gov Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4433
2016-02-29 18:05:23 +00:00
*/
int
lowbit64(uint64_t i)
{
if (i == 0)
return (0);
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-09 22:31:08 +00:00
return (__builtin_ffsll(i));
}
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues Update the zfs module to collect statistics on average latencies, queue sizes, and keep an internal histogram of all IO latencies. Along with this, update "zpool iostat" with some new options to print out the stats: -l: Include average IO latencies stats: total_wait disk_wait syncq_wait asyncq_wait scrub read write read write read write read write wait ----- ----- ----- ----- ----- ----- ----- ----- ----- - 41ms - 2ms - 46ms - 4ms - - 5ms - 1ms - 1us - 4ms - - 5ms - 1ms - 1us - 4ms - - - - - - - - - - - 49ms - 2ms - 47ms - - - - - - - - - - - - - 2ms - 1ms - - - 1ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- 1ms 1ms 1ms 413us 16us 25us - 5ms - 1ms 1ms 1ms 413us 16us 25us - 5ms - 2ms 1ms 2ms 412us 26us 25us - 5ms - - 1ms - 413us - 25us - 5ms - - 1ms - 460us - 29us - 5ms - 196us 1ms 196us 370us 7us 23us - 5ms - ----- ----- ----- ----- ----- ----- ----- ----- ----- -w: Print out latency histograms: sdb total disk sync_queue async_queue latency read write read write read write read write scrub ------- ------ ------ ------ ------ ------ ------ ------ ------ ------ 1ns 0 0 0 0 0 0 0 0 0 ... 33us 0 0 0 0 0 0 0 0 0 66us 0 0 107 2486 2 788 12 12 0 131us 2 797 359 4499 10 558 184 184 6 262us 22 801 264 1563 10 286 287 287 24 524us 87 575 71 52086 15 1063 136 136 92 1ms 152 1190 5 41292 4 1693 252 252 141 2ms 245 2018 0 50007 0 2322 371 371 220 4ms 189 7455 22 162957 0 3912 6726 6726 199 8ms 108 9461 0 102320 0 5775 2526 2526 86 17ms 23 11287 0 37142 0 8043 1813 1813 19 34ms 0 14725 0 24015 0 11732 3071 3071 0 67ms 0 23597 0 7914 0 18113 5025 5025 0 134ms 0 33798 0 254 0 25755 7326 7326 0 268ms 0 51780 0 12 0 41593 10002 10002 0 537ms 0 77808 0 0 0 64255 13120 13120 0 1s 0 105281 0 0 0 83805 20841 20841 0 2s 0 88248 0 0 0 73772 14006 14006 0 4s 0 47266 0 0 0 29783 17176 17176 0 9s 0 10460 0 0 0 4130 6295 6295 0 17s 0 0 0 0 0 0 0 0 0 34s 0 0 0 0 0 0 0 0 0 69s 0 0 0 0 0 0 0 0 0 137s 0 0 0 0 0 0 0 0 0 ------------------------------------------------------------------------------- -h: Help -H: Scripted mode. Do not display headers, and separate fields by a single tab instead of arbitrary space. -q: Include current number of entries in sync & async read/write queues, and scrub queue: syncq_read syncq_write asyncq_read asyncq_write scrubq_read pend activ pend activ pend activ pend activ pend activ ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 0 0 78 29 0 0 0 0 0 0 0 0 78 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 - - - - - - - - - - 0 0 0 0 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 0 0 227 394 0 19 0 0 0 0 0 0 227 394 0 19 0 0 0 0 0 0 108 98 0 19 0 0 0 0 0 0 19 98 0 0 0 0 0 0 0 0 78 98 0 0 0 0 0 0 0 0 19 88 0 0 0 0 0 0 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- -p: Display numbers in parseable (exact) values. Also, update iostat syntax to allow the user to specify specific vdevs to show statistics for. The three options for choosing pools/vdevs are: Display a list of pools: zpool iostat ... [pool ...] Display a list of vdevs from a specific pool: zpool iostat ... [pool vdev ...] Display a list of vdevs from any pools: zpool iostat ... [vdev ...] Lastly, allow zpool command "interval" value to be floating point: zpool iostat -v 0.5 Signed-off-by: Tony Hutter <hutter2@llnl.gov Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4433
2016-02-29 18:05:23 +00:00
const char *random_path = "/dev/random";
const char *urandom_path = "/dev/urandom";
2008-11-20 20:01:55 +00:00
static int random_fd = -1, urandom_fd = -1;
void
random_init(void)
{
VERIFY((random_fd = open(random_path, O_RDONLY | O_CLOEXEC)) != -1);
VERIFY((urandom_fd = open(urandom_path, O_RDONLY | O_CLOEXEC)) != -1);
}
void
random_fini(void)
{
close(random_fd);
close(urandom_fd);
random_fd = -1;
urandom_fd = -1;
}
2008-11-20 20:01:55 +00:00
static int
random_get_bytes_common(uint8_t *ptr, size_t len, int fd)
{
size_t resid = len;
ssize_t bytes;
ASSERT(fd != -1);
while (resid != 0) {
bytes = read(fd, ptr, resid);
ASSERT3S(bytes, >=, 0);
ptr += bytes;
resid -= bytes;
}
return (0);
}
int
random_get_bytes(uint8_t *ptr, size_t len)
{
return (random_get_bytes_common(ptr, len, random_fd));
}
int
random_get_pseudo_bytes(uint8_t *ptr, size_t len)
{
return (random_get_bytes_common(ptr, len, urandom_fd));
}
int
ddi_strtoull(const char *str, char **nptr, int base, u_longlong_t *result)
{
(void) nptr;
char *end;
*result = strtoull(str, &end, base);
if (*result == 0)
return (errno);
return (0);
}
utsname_t *
utsname(void)
{
return (&hw_utsname);
}
2008-11-20 20:01:55 +00:00
/*
* =========================================================================
* kernel emulation setup & teardown
* =========================================================================
*/
static int
umem_out_of_memory(void)
{
char errmsg[] = "out of memory -- generating core dump\n";
(void) fprintf(stderr, "%s", errmsg);
2008-11-20 20:01:55 +00:00
abort();
return (0);
}
void
kernel_init(int mode)
{
extern uint_t rrw_tsd_key;
2008-11-20 20:01:55 +00:00
umem_nofail_callback(umem_out_of_memory);
physmem = sysconf(_SC_PHYS_PAGES);
dprintf("physmem = %llu pages (%.2f GB)\n", (u_longlong_t)physmem,
2008-11-20 20:01:55 +00:00
(double)physmem * sysconf(_SC_PAGE_SIZE) / (1ULL << 30));
hostid = (mode & SPA_MODE_WRITE) ? get_system_hostid() : 0;
2008-11-20 20:01:55 +00:00
random_init();
VERIFY0(uname(&hw_utsname));
2008-11-20 20:01:55 +00:00
system_taskq_init();
icp_init();
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
zstd_init();
spa_init((spa_mode_t)mode);
fletcher_4_init();
tsd_create(&rrw_tsd_key, rrw_tsd_destroy);
2008-11-20 20:01:55 +00:00
}
void
kernel_fini(void)
{
fletcher_4_fini();
2008-11-20 20:01:55 +00:00
spa_fini();
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
zstd_fini();
icp_fini();
system_taskq_fini();
random_fini();
2008-11-20 20:01:55 +00:00
}
uid_t
crgetuid(cred_t *cr)
{
(void) cr;
2008-11-20 20:01:55 +00:00
return (0);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
uid_t
crgetruid(cred_t *cr)
{
(void) cr;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
return (0);
}
2008-11-20 20:01:55 +00:00
gid_t
crgetgid(cred_t *cr)
{
(void) cr;
2008-11-20 20:01:55 +00:00
return (0);
}
int
crgetngroups(cred_t *cr)
{
(void) cr;
2008-11-20 20:01:55 +00:00
return (0);
}
gid_t *
crgetgroups(cred_t *cr)
{
(void) cr;
2008-11-20 20:01:55 +00:00
return (NULL);
}
int
zfs_secpolicy_snapshot_perms(const char *name, cred_t *cr)
{
(void) name, (void) cr;
2008-11-20 20:01:55 +00:00
return (0);
}
int
zfs_secpolicy_rename_perms(const char *from, const char *to, cred_t *cr)
{
(void) from, (void) to, (void) cr;
2008-11-20 20:01:55 +00:00
return (0);
}
int
zfs_secpolicy_destroy_perms(const char *name, cred_t *cr)
{
(void) name, (void) cr;
2008-11-20 20:01:55 +00:00
return (0);
}
Add `zfs allow` and `zfs unallow` support ZFS allows for specific permissions to be delegated to normal users with the `zfs allow` and `zfs unallow` commands. In addition, non- privileged users should be able to run all of the following commands: * zpool [list | iostat | status | get] * zfs [list | get] Historically this functionality was not available on Linux. In order to add it the secpolicy_* functions needed to be implemented and mapped to the equivalent Linux capability. Only then could the permissions on the `/dev/zfs` be relaxed and the internal ZFS permission checks used. Even with this change some limitations remain. Under Linux only the root user is allowed to modify the namespace (unless it's a private namespace). This means the mount, mountpoint, canmount, unmount, and remount delegations cannot be supported with the existing code. It may be possible to add this functionality in the future. This functionality was validated with the cli_user and delegation test cases from the ZFS Test Suite. These tests exhaustively verify each of the supported permissions which can be delegated and ensures only an authorized user can perform it. Two minor bug fixes were required for test-running.py. First, the Timer() object cannot be safely created in a `try:` block when there is an unconditional `finally` block which references it. Second, when running as a normal user also check for scripts using the both the .ksh and .sh suffixes. Finally, existing users who are simulating delegations by setting group permissions on the /dev/zfs device should revert that customization when updating to a version with this change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #362 Closes #434 Closes #4100 Closes #4394 Closes #4410 Closes #4487
2016-06-07 16:16:52 +00:00
int
secpolicy_zfs(const cred_t *cr)
{
(void) cr;
Add `zfs allow` and `zfs unallow` support ZFS allows for specific permissions to be delegated to normal users with the `zfs allow` and `zfs unallow` commands. In addition, non- privileged users should be able to run all of the following commands: * zpool [list | iostat | status | get] * zfs [list | get] Historically this functionality was not available on Linux. In order to add it the secpolicy_* functions needed to be implemented and mapped to the equivalent Linux capability. Only then could the permissions on the `/dev/zfs` be relaxed and the internal ZFS permission checks used. Even with this change some limitations remain. Under Linux only the root user is allowed to modify the namespace (unless it's a private namespace). This means the mount, mountpoint, canmount, unmount, and remount delegations cannot be supported with the existing code. It may be possible to add this functionality in the future. This functionality was validated with the cli_user and delegation test cases from the ZFS Test Suite. These tests exhaustively verify each of the supported permissions which can be delegated and ensures only an authorized user can perform it. Two minor bug fixes were required for test-running.py. First, the Timer() object cannot be safely created in a `try:` block when there is an unconditional `finally` block which references it. Second, when running as a normal user also check for scripts using the both the .ksh and .sh suffixes. Finally, existing users who are simulating delegations by setting group permissions on the /dev/zfs device should revert that customization when updating to a version with this change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #362 Closes #434 Closes #4100 Closes #4394 Closes #4410 Closes #4487
2016-06-07 16:16:52 +00:00
return (0);
}
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 00:18:02 +00:00
int
secpolicy_zfs_proc(const cred_t *cr, proc_t *proc)
{
(void) cr, (void) proc;
filesystem_limit/snapshot_limit is incorrectly enforced against root The filesystem_limit and snapshot_limit properties limit the number of filesystems or snapshots that can be created below this dataset. According to the manpage, "The limit is not enforced if the user is allowed to change the limit." Two types of users are allowed to change the limit: 1. Those that have been delegated the `filesystem_limit` or `snapshot_limit` permission, e.g. with `zfs allow USER filesystem_limit DATASET`. This works properly. 2. A user with elevated system privileges (e.g. root). This does not work - the root user will incorrectly get an error when trying to create a snapshot/filesystem, if it exceeds the `_limit` property. The problem is that `priv_policy_ns()` does not work if the `cred_t` is not that of the current process. This happens when `dsl_enforce_ds_ss_limits()` is called in syncing context (as part of a sync task's check func) to determine the permissions of the corresponding user process. This commit fixes the issue by passing the `task_struct` (typedef'ed as a `proc_t`) to syncing context, and then using `has_capability()` to determine if that process is privileged. Note that we still need to pass the `cred_t` to syncing context so that we can check if the user was delegated this permission with `zfs allow`. This problem only impacts Linux. Wrappers are added to FreeBSD but it continues to use `priv_check_cred()`, which works on arbitrary `cred_t`. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #8226 Closes #10545
2020-07-12 00:18:02 +00:00
return (0);
}
2008-11-20 20:01:55 +00:00
ksiddomain_t *
ksid_lookupdomain(const char *dom)
{
ksiddomain_t *kd;
kd = umem_zalloc(sizeof (ksiddomain_t), UMEM_NOFAIL);
kd->kd_name = spa_strdup(dom);
return (kd);
}
void
ksiddomain_rele(ksiddomain_t *ksid)
{
spa_strfree(ksid->kd_name);
umem_free(ksid, sizeof (ksiddomain_t));
}
char *
kmem_vasprintf(const char *fmt, va_list adx)
{
char *buf = NULL;
va_list adx_copy;
va_copy(adx_copy, adx);
VERIFY(vasprintf(&buf, fmt, adx_copy) != -1);
va_end(adx_copy);
return (buf);
}
char *
kmem_asprintf(const char *fmt, ...)
{
char *buf = NULL;
va_list adx;
va_start(adx, fmt);
VERIFY(vasprintf(&buf, fmt, adx) != -1);
va_end(adx);
return (buf);
}
zfs_file_t *
zfs_onexit_fd_hold(int fd, minor_t *minorp)
{
(void) fd;
*minorp = 0;
return (NULL);
}
void
zfs_onexit_fd_rele(zfs_file_t *fp)
{
(void) fp;
}
int
zfs_onexit_add_cb(minor_t minor, void (*func)(void *), void *data,
uint64_t *action_handle)
{
(void) minor, (void) func, (void) data, (void) action_handle;
return (0);
}
fstrans_cookie_t
spl_fstrans_mark(void)
{
return ((fstrans_cookie_t)0);
}
void
spl_fstrans_unmark(fstrans_cookie_t cookie)
{
(void) cookie;
}
int
__spl_pf_fstrans_check(void)
{
return (0);
}
OpenZFS 9284 - arc_reclaim_thread has 2 jobs Following the fix for 9018 (Replace kmem_cache_reap_now() with kmem_cache_reap_soon), the arc_reclaim_thread() no longer blocks while reaping. However, the code is still confusing and error-prone, because this thread has two responsibilities. We should instead separate this into two threads each with their own responsibility: 1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which improves `arc_is_overflowing()` 2. keep enough free memory in the system, by calling `arc_kmem_reap_now()` plus `arc_shrink()`, which improves `arc_available_memory()`. Furthermore, we can use the zthr infrastructure to separate the "should we do something" from "do it" parts of the logic, and normalize the start up / shut down of the threads. Authored by: Brad Lewis <brad.lewis@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Dan McDonald <danmcd@joyent.com> Reviewed by: Tim Kordas <tim.kordas@joyent.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Brad Lewis <brad.lewis@delphix.com> Signed-off-by: Brad Lewis <brad.lewis@delphix.com> OpenZFS-issue: https://www.illumos.org/issues/9284 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/de753e34f9 Closes #8165
2017-03-15 23:41:52 +00:00
int
kmem_cache_reap_active(void)
{
return (0);
}
OpenZFS 2605, 6980, 6902 2605 want to resume interrupted zfs send Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed by: Xin Li <delphij@freebsd.org> Reviewed by: Arne Jansen <sensille@gmx.net> Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: kernelOfTruth <kerneloftruth@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/2605 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12 6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Ported by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/6980 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f Porting notes: - All rsend and snapshop tests enabled and updated for Linux. - Fix misuse of input argument in traverse_visitbp(). - Fix ISO C90 warnings and errors. - Fix gcc 'missing braces around initializer' in 'struct send_thread_arg to_arg =' warning. - Replace 4 argument fletcher_4_native() with 3 argument version, this change was made in OpenZFS 4185 which has not been ported. - Part of the sections for 'zfs receive' and 'zfs send' was rewritten and reordered to approximate upstream. - Fix mktree xattr creation, 'user.' prefix required. - Minor fixes to newly enabled test cases - Long holds for volumes allowed during receive for minor registration.
2016-01-06 21:22:48 +00:00
void *zvol_tag = "zvol_tag";
void
zvol_create_minor(const char *name)
{
(void) name;
}
void
zvol_create_minors_recursive(const char *name)
{
(void) name;
}
void
zvol_remove_minors(spa_t *spa, const char *name, boolean_t async)
{
(void) spa, (void) name, (void) async;
}
void
zvol_rename_minors(spa_t *spa, const char *oldname, const char *newname,
boolean_t async)
{
(void) spa, (void) oldname, (void) newname, (void) async;
}
/*
* Open file
*
* path - fully qualified path to file
* flags - file attributes O_READ / O_WRITE / O_EXCL
* fpp - pointer to return file pointer
*
* Returns 0 on success underlying error on failure.
*/
int
zfs_file_open(const char *path, int flags, int mode, zfs_file_t **fpp)
{
int fd = -1;
int dump_fd = -1;
int err;
int old_umask = 0;
zfs_file_t *fp;
struct stat64 st;
if (!(flags & O_CREAT) && stat64(path, &st) == -1)
return (errno);
if (!(flags & O_CREAT) && S_ISBLK(st.st_mode))
flags |= O_DIRECT;
if (flags & O_CREAT)
old_umask = umask(0);
fd = open64(path, flags, mode);
if (fd == -1)
return (errno);
if (flags & O_CREAT)
(void) umask(old_umask);
if (vn_dumpdir != NULL) {
char *dumppath = umem_zalloc(MAXPATHLEN, UMEM_NOFAIL);
const char *inpath = zfs_basename(path);
(void) snprintf(dumppath, MAXPATHLEN,
"%s/%s", vn_dumpdir, inpath);
dump_fd = open64(dumppath, O_CREAT | O_WRONLY, 0666);
umem_free(dumppath, MAXPATHLEN);
if (dump_fd == -1) {
err = errno;
close(fd);
return (err);
}
} else {
dump_fd = -1;
}
(void) fcntl(fd, F_SETFD, FD_CLOEXEC);
fp = umem_zalloc(sizeof (zfs_file_t), UMEM_NOFAIL);
fp->f_fd = fd;
fp->f_dump_fd = dump_fd;
*fpp = fp;
return (0);
}
void
zfs_file_close(zfs_file_t *fp)
{
close(fp->f_fd);
if (fp->f_dump_fd != -1)
close(fp->f_dump_fd);
umem_free(fp, sizeof (zfs_file_t));
}
/*
* Stateful write - use os internal file pointer to determine where to
* write and update on successful completion.
*
* fp - pointer to file (pipe, socket, etc) to write to
* buf - buffer to write
* count - # of bytes to write
* resid - pointer to count of unwritten bytes (if short write)
*
* Returns 0 on success errno on failure.
*/
int
zfs_file_write(zfs_file_t *fp, const void *buf, size_t count, ssize_t *resid)
{
ssize_t rc;
rc = write(fp->f_fd, buf, count);
if (rc < 0)
return (errno);
if (resid) {
*resid = count - rc;
} else if (rc != count) {
return (EIO);
}
return (0);
}
/*
* Stateless write - os internal file pointer is not updated.
*
* fp - pointer to file (pipe, socket, etc) to write to
* buf - buffer to write
* count - # of bytes to write
* off - file offset to write to (only valid for seekable types)
* resid - pointer to count of unwritten bytes
*
* Returns 0 on success errno on failure.
*/
int
zfs_file_pwrite(zfs_file_t *fp, const void *buf,
size_t count, loff_t pos, ssize_t *resid)
{
ssize_t rc, split, done;
int sectors;
/*
* To simulate partial disk writes, we split writes into two
* system calls so that the process can be killed in between.
* This is used by ztest to simulate realistic failure modes.
*/
sectors = count >> SPA_MINBLOCKSHIFT;
split = (sectors > 0 ? rand() % sectors : 0) << SPA_MINBLOCKSHIFT;
rc = pwrite64(fp->f_fd, buf, split, pos);
if (rc != -1) {
done = rc;
rc = pwrite64(fp->f_fd, (char *)buf + split,
count - split, pos + split);
}
#ifdef __linux__
if (rc == -1 && errno == EINVAL) {
/*
* Under Linux, this most likely means an alignment issue
* (memory or disk) due to O_DIRECT, so we abort() in order
* to catch the offender.
*/
abort();
}
#endif
if (rc < 0)
return (errno);
done += rc;
if (resid) {
*resid = count - done;
} else if (done != count) {
return (EIO);
}
return (0);
}
/*
* Stateful read - use os internal file pointer to determine where to
* read and update on successful completion.
*
* fp - pointer to file (pipe, socket, etc) to read from
* buf - buffer to write
* count - # of bytes to read
* resid - pointer to count of unread bytes (if short read)
*
* Returns 0 on success errno on failure.
*/
int
zfs_file_read(zfs_file_t *fp, void *buf, size_t count, ssize_t *resid)
{
int rc;
rc = read(fp->f_fd, buf, count);
if (rc < 0)
return (errno);
if (resid) {
*resid = count - rc;
} else if (rc != count) {
return (EIO);
}
return (0);
}
/*
* Stateless read - os internal file pointer is not updated.
*
* fp - pointer to file (pipe, socket, etc) to read from
* buf - buffer to write
* count - # of bytes to write
* off - file offset to read from (only valid for seekable types)
* resid - pointer to count of unwritten bytes (if short write)
*
* Returns 0 on success errno on failure.
*/
int
zfs_file_pread(zfs_file_t *fp, void *buf, size_t count, loff_t off,
ssize_t *resid)
{
ssize_t rc;
rc = pread64(fp->f_fd, buf, count, off);
if (rc < 0) {
#ifdef __linux__
/*
* Under Linux, this most likely means an alignment issue
* (memory or disk) due to O_DIRECT, so we abort() in order to
* catch the offender.
*/
if (errno == EINVAL)
abort();
#endif
return (errno);
}
if (fp->f_dump_fd != -1) {
int status;
status = pwrite64(fp->f_dump_fd, buf, rc, off);
ASSERT(status != -1);
}
if (resid) {
*resid = count - rc;
} else if (rc != count) {
return (EIO);
}
return (0);
}
/*
* lseek - set / get file pointer
*
* fp - pointer to file (pipe, socket, etc) to read from
* offp - value to seek to, returns current value plus passed offset
* whence - see man pages for standard lseek whence values
*
* Returns 0 on success errno on failure (ESPIPE for non seekable types)
*/
int
zfs_file_seek(zfs_file_t *fp, loff_t *offp, int whence)
{
loff_t rc;
rc = lseek(fp->f_fd, *offp, whence);
if (rc < 0)
return (errno);
*offp = rc;
return (0);
}
/*
* Get file attributes
*
* filp - file pointer
* zfattr - pointer to file attr structure
*
* Currently only used for fetching size and file mode
*
* Returns 0 on success or error code of underlying getattr call on failure.
*/
int
zfs_file_getattr(zfs_file_t *fp, zfs_file_attr_t *zfattr)
{
struct stat64 st;
if (fstat64_blk(fp->f_fd, &st) == -1)
return (errno);
zfattr->zfa_size = st.st_size;
zfattr->zfa_mode = st.st_mode;
return (0);
}
/*
* Sync file to disk
*
* filp - file pointer
* flags - O_SYNC and or O_DSYNC
*
* Returns 0 on success or error code of underlying sync call on failure.
*/
int
zfs_file_fsync(zfs_file_t *fp, int flags)
{
(void) flags;
if (fsync(fp->f_fd) < 0)
return (errno);
return (0);
}
/*
* fallocate - allocate or free space on disk
*
* fp - file pointer
* mode (non-standard options for hole punching etc)
* offset - offset to start allocating or freeing from
* len - length to free / allocate
*
* OPTIONAL
*/
int
zfs_file_fallocate(zfs_file_t *fp, int mode, loff_t offset, loff_t len)
{
#ifdef __linux__
return (fallocate(fp->f_fd, mode, offset, len));
#else
(void) fp, (void) mode, (void) offset, (void) len;
return (EOPNOTSUPP);
#endif
}
/*
* Request current file pointer offset
*
* fp - pointer to file
*
* Returns current file offset.
*/
loff_t
zfs_file_off(zfs_file_t *fp)
{
return (lseek(fp->f_fd, SEEK_CUR, 0));
}
/*
* unlink file
*
* path - fully qualified file path
*
* Returns 0 on success.
*
* OPTIONAL
*/
int
zfs_file_unlink(const char *path)
{
return (remove(path));
}
/*
* Get reference to file pointer
*
* fd - input file descriptor
*
* Returns pointer to file struct or NULL.
* Unsupported in user space.
*/
zfs_file_t *
zfs_file_get(int fd)
{
(void) fd;
abort();
return (NULL);
}
/*
* Drop reference to file pointer
*
* fp - pointer to file struct
*
* Unsupported in user space.
*/
void
zfs_file_put(zfs_file_t *fp)
{
abort();
(void) fp;
}
void
zfsvfs_update_fromname(const char *oldname, const char *newname)
{
(void) oldname, (void) newname;
}
void
spa_import_os(spa_t *spa)
{
(void) spa;
}
void
spa_export_os(spa_t *spa)
{
(void) spa;
}
void
spa_activate_os(spa_t *spa)
{
(void) spa;
}
void
spa_deactivate_os(spa_t *spa)
{
(void) spa;
}