2021-12-12 19:17:14 +00:00
|
|
|
# OpenZFS userland configuration.
|
2022-01-06 22:36:04 +00:00
|
|
|
# shellcheck disable=SC2154
|
Base init scripts for SYSV systems
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2974
Closes #2107
2015-04-23 18:35:45 +00:00
|
|
|
|
2019-11-06 19:36:33 +00:00
|
|
|
# NOTE: This file is intended for sysv init and initramfs.
|
|
|
|
|
# Changing some of these settings may not make any difference on
|
|
|
|
|
# systemd-based setup, e.g. setting ZFS_MOUNT=no will not prevent systemd
|
|
|
|
|
# from launching zfs-mount.service during boot.
|
|
|
|
|
# See: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=901436
|
|
|
|
|
|
2015-09-22 07:56:28 +00:00
|
|
|
# To enable a boolean setting, set it to yes, on, true, or 1.
|
|
|
|
|
# Anything else will be interpreted as unset.
|
2021-11-30 18:23:10 +00:00
|
|
|
# shellcheck disable=SC2034
|
2015-09-22 07:56:28 +00:00
|
|
|
|
2021-12-12 19:17:14 +00:00
|
|
|
# Run `zfs load-key` during system start?
|
|
|
|
|
ZFS_LOAD_KEY='yes'
|
|
|
|
|
|
|
|
|
|
# Run `zfs unload-key` during system stop?
|
|
|
|
|
ZFS_UNLOAD_KEY='no'
|
|
|
|
|
|
Base init scripts for SYSV systems
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2974
Closes #2107
2015-04-23 18:35:45 +00:00
|
|
|
# Run `zfs mount -a` during system start?
|
|
|
|
|
ZFS_MOUNT='yes'
|
|
|
|
|
|
|
|
|
|
# Run `zfs unmount -a` during system stop?
|
|
|
|
|
ZFS_UNMOUNT='yes'
|
|
|
|
|
|
|
|
|
|
# Run `zfs share -a` during system start?
|
|
|
|
|
# nb: The shareiscsi, sharenfs, and sharesmb dataset properties.
|
|
|
|
|
ZFS_SHARE='yes'
|
|
|
|
|
|
|
|
|
|
# Run `zfs unshare -a` during system stop?
|
|
|
|
|
ZFS_UNSHARE='yes'
|
|
|
|
|
|
zfs-import: Perform verbatim import using cache file
This change modifies the import service to use the default cache file
to perform a verbatim import of pools at boot. This fixes code that
searches all devices and imported all visible pools.
Using the cache file is in keeping with the way ZFS has always worked,
how Solaris, Illumos, FreeBSD, and systemd performs imports, and is how
it is written in the man page (zpool(1M,8)):
All pools in this cache are automatically imported when the
system boots.
Importantly, the cache contains important information for importing
multipath devices, and helps control which pools get imported in more
dynamic environments like SANs, which may have thousands of visible
and constantly changing pools, which the ZFS_POOL_EXCEPTIONS variable
is not equipped to handle. Verbatim imports prevent rogue pools from
being automatically imported and mounted where they shouldn't be.
The change also stops the service from exporting pools at shutdown.
Exporting pools is only meant to be performed explicitly by the
administrator of the system.
The old behavior of searching and importing all visible pools is
preserved and can be switched on by heeding the warning and toggling
the ZPOOL_IMPORT_ALL_VISIBLE variable in /etc/default/zfs.
Signed-off-by: James Lee <jlee@thestaticvoid.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3777
Closes #3526
2015-09-20 02:00:36 +00:00
|
|
|
# By default, a verbatim import of all pools is performed at boot based on the
|
|
|
|
|
# contents of the default zpool cache file. The contents of the cache are
|
|
|
|
|
# managed automatically by the 'zpool import' and 'zpool export' commands.
|
|
|
|
|
#
|
|
|
|
|
# By setting this to 'yes', the system will instead search all devices for
|
|
|
|
|
# pools and attempt to import them all at boot, even those that have been
|
|
|
|
|
# exported. Under this mode, the search path can be controlled by the
|
|
|
|
|
# ZPOOL_IMPORT_PATH variable and a list of pools that should not be imported
|
|
|
|
|
# can be listed in the ZFS_POOL_EXCEPTIONS variable.
|
|
|
|
|
#
|
|
|
|
|
# Note that importing all visible pools may include pools that you don't
|
|
|
|
|
# expect, such as those on removable devices and SANs, and those pools may
|
|
|
|
|
# proceed to mount themselves in places you do not want them to. The results
|
|
|
|
|
# can be unpredictable and possibly dangerous. Only enable this option if you
|
|
|
|
|
# understand this risk and have complete physical control over your system and
|
|
|
|
|
# SAN to prevent the insertion of malicious pools.
|
|
|
|
|
ZPOOL_IMPORT_ALL_VISIBLE='no'
|
|
|
|
|
|
Base init scripts for SYSV systems
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2974
Closes #2107
2015-04-23 18:35:45 +00:00
|
|
|
# Specify specific path(s) to look for device nodes and/or links for the
|
|
|
|
|
# pool import(s). See zpool(8) for more information about this variable.
|
|
|
|
|
# It supersedes the old USE_DISK_BY_ID which indicated that it would only
|
|
|
|
|
# try '/dev/disk/by-id'.
|
|
|
|
|
# The old variable will still work in the code, but is deprecated.
|
|
|
|
|
#ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:/dev/disk/by-id"
|
|
|
|
|
|
zfs-import: Perform verbatim import using cache file
This change modifies the import service to use the default cache file
to perform a verbatim import of pools at boot. This fixes code that
searches all devices and imported all visible pools.
Using the cache file is in keeping with the way ZFS has always worked,
how Solaris, Illumos, FreeBSD, and systemd performs imports, and is how
it is written in the man page (zpool(1M,8)):
All pools in this cache are automatically imported when the
system boots.
Importantly, the cache contains important information for importing
multipath devices, and helps control which pools get imported in more
dynamic environments like SANs, which may have thousands of visible
and constantly changing pools, which the ZFS_POOL_EXCEPTIONS variable
is not equipped to handle. Verbatim imports prevent rogue pools from
being automatically imported and mounted where they shouldn't be.
The change also stops the service from exporting pools at shutdown.
Exporting pools is only meant to be performed explicitly by the
administrator of the system.
The old behavior of searching and importing all visible pools is
preserved and can be switched on by heeding the warning and toggling
the ZPOOL_IMPORT_ALL_VISIBLE variable in /etc/default/zfs.
Signed-off-by: James Lee <jlee@thestaticvoid.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3777
Closes #3526
2015-09-20 02:00:36 +00:00
|
|
|
# List of pools that should NOT be imported at boot
|
|
|
|
|
# when ZPOOL_IMPORT_ALL_VISIBLE is 'yes'.
|
|
|
|
|
# This is a space separated list.
|
|
|
|
|
#ZFS_POOL_EXCEPTIONS="test2"
|
|
|
|
|
|
Base init scripts for SYSV systems
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2974
Closes #2107
2015-04-23 18:35:45 +00:00
|
|
|
# Should the datasets be mounted verbosely?
|
|
|
|
|
# A mount counter will be used when mounting if set to 'yes'.
|
|
|
|
|
VERBOSE_MOUNT='no'
|
|
|
|
|
|
|
|
|
|
# Should we allow overlay mounts?
|
|
|
|
|
# This is standard in Linux, but not ZFS which comes from Solaris where this
|
|
|
|
|
# is not allowed).
|
|
|
|
|
DO_OVERLAY_MOUNTS='no'
|
|
|
|
|
|
2015-09-22 07:56:28 +00:00
|
|
|
# Any additional option to the 'zfs import' commandline?
|
|
|
|
|
# Include '-o' for each option wanted.
|
|
|
|
|
# You don't need to put '-f' in here, unless you want it ALL the time.
|
|
|
|
|
# Using the option 'zfsforce=1' on the grub/kernel command line will
|
|
|
|
|
# do the same, but on a case-to-case basis.
|
|
|
|
|
ZPOOL_IMPORT_OPTS=""
|
|
|
|
|
|
|
|
|
|
# Full path to the ZFS cache file?
|
|
|
|
|
# See "cachefile" in zpool(8).
|
|
|
|
|
# The default is "@sysconfdir@/zfs/zpool.cache".
|
|
|
|
|
#ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
|
|
|
|
|
#
|
|
|
|
|
# Setting ZPOOL_CACHE to an empty string ('') AND setting ZPOOL_IMPORT_OPTS to
|
|
|
|
|
# "-c @sysconfdir@/zfs/zpool.cache" will _enforce_ the use of a cache file.
|
|
|
|
|
# This is needed in some cases (extreme amounts of VDEVs, multipath etc).
|
|
|
|
|
# Generally, the use of a cache file is usually not recommended on Linux
|
|
|
|
|
# because it sometimes is more trouble than it's worth (laptops with external
|
|
|
|
|
# devices or when/if device nodes changes names).
|
|
|
|
|
#ZPOOL_IMPORT_OPTS="-c @sysconfdir@/zfs/zpool.cache"
|
|
|
|
|
#ZPOOL_CACHE=""
|
|
|
|
|
|
Base init scripts for SYSV systems
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2974
Closes #2107
2015-04-23 18:35:45 +00:00
|
|
|
# Any additional option to the 'zfs mount' command line?
|
|
|
|
|
# Include '-o' for each option wanted.
|
|
|
|
|
MOUNT_EXTRA_OPTIONS=""
|
|
|
|
|
|
|
|
|
|
# Build kernel modules with the --enable-debug switch?
|
|
|
|
|
# Only applicable for Debian GNU/Linux {dkms,initramfs}.
|
|
|
|
|
ZFS_DKMS_ENABLE_DEBUG='no'
|
|
|
|
|
|
2019-08-22 16:48:48 +00:00
|
|
|
# Build kernel modules with the --enable-debuginfo switch?
|
|
|
|
|
# Only applicable for Debian GNU/Linux {dkms,initramfs}.
|
|
|
|
|
ZFS_DKMS_ENABLE_DEBUGINFO='no'
|
|
|
|
|
|
Base init scripts for SYSV systems
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes #2974
Closes #2107
2015-04-23 18:35:45 +00:00
|
|
|
# Keep debugging symbols in kernel modules?
|
|
|
|
|
# Only applicable for Debian GNU/Linux {dkms,initramfs}.
|
|
|
|
|
ZFS_DKMS_DISABLE_STRIP='no'
|
|
|
|
|
|
|
|
|
|
# Optional arguments for the ZFS Event Daemon (ZED).
|
|
|
|
|
# See zed(8) for more information on available options.
|
|
|
|
|
#ZED_ARGS="-M"
|
