Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/udev/rules.d/69-vdev.rules.in

16 lines
813 B
Plaintext
Raw Permalink Normal View History

Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 00:32:30 +00:00
#
vdev_id support for device link aliases Add a vdev_id feature to map device names based on already defined udev device links. To increase the odds that vdev_id will run after the rules it depends on, increase the vdev.rules rule number from 60 to 69. With this change, vdev_id now provides functionality analogous to zpool_id and zpool_layout, paving the way to retire those tools. A defined alias takes precedence over a topology-derived name, but the two naming methods can otherwise coexist. For example, one might name drives in a JBOD with the sas_direct topology while naming an internal L2ARC device with an alias. For example, the following lines in vdev_id.conf will result in the creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same target as the device link specified in the third field. # by-vdev # name fully qualified or base name of device link alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca alias d2 wwn-0x5000c5002def789e Also perform some minor vdev_id cleanup, such as removal of the unused -s command line option. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #981
2012-11-29 19:08:37 +00:00
# @udevdir@/rules.d/69-vdev.rules
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 00:32:30 +00:00
#
Fix hard coded path in 60-vdev.rules.in The udev data directory was hard coded in 60-vdev.rules.in. That causes a problem when a distribution changes the location of the directory. This was not an issue in the past because virtually all distributions used the same path, but that is beginning to change following a decision by the systemd developers to change the directory location to reflect their take-over of udev maintainership. The testing branch of Gentoo Linux adopted this change, which enabled the hardcoded directory location to trigger a regression. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1085
2012-11-12 17:34:45 +00:00
ENV{DEVTYPE}=="disk", IMPORT{program}="@udevdir@/vdev_id -d %k"
Allow partition aliases in vdev_id.conf (#5266) When pools are assembled from partitions, vdev_id.conf aliases do not work. The directory /dev/disk/by-vdev is not created because the associated udev rule for parsing vdev_id.conf is never called. Extend to logic to match "disk" and "partition". Patch-proposed-by: @sparksh Reviewed-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3859 Closes #5266
2016-10-14 23:11:16 +00:00
ENV{DEVTYPE}=="partition", IMPORT{program}="@udevdir@/vdev_id -d %k"
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 00:32:30 +00:00
KERNEL=="*[!0-9]", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
Create symbolic links in /dev/disk/by-vdev for nvme disk devices The existing rules miss nvme disk devices because of the trailing digits in the KERNEL device name, e.g. nvme0n1. Partitions of nvme disk devices are already properly handled by the existing rule for ENV{DEVTYPE}=="partition". Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Signed-off-by: Thomas Geppert <geppi@digitx.de> Closes #9730
2019-12-18 01:50:20 +00:00
KERNEL=="nvme*[0-9]n*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="disk", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
Add vdev_id for JBOD-friendly udev aliases vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path in a storage topology to a channel name. The channel name is combined with a disk enclosure slot number to create an alias that reflects the physical location of the drive. This is particularly helpful when it comes to tasks like replacing failed drives. Slot numbers may also be re-mapped in case the default numbering is unsatisfactory. The drive aliases will be created as symbolic links in /dev/disk/by-vdev. The only currently supported topologies are sas_direct and sas_switch: o sas_direct - a channel is uniquely identified by a PCI slot and a HBA port o sas_switch - a channel is uniquely identified by a SAS switch port A multipath mode is supported in which dm-mpath devices are handled by examining the first running component disk, as reported by 'multipath -l'. In multipath mode the configuration file should contain a channel definition with the same name for each path to a given enclosure. vdev_id can replace the existing zpool_id script on systems where the storage topology conforms to sas_direct or sas_switch. The script could be extended to support other topologies as well. The advantage of vdev_id is that it is driven by a single static input file that can be shared across multiple nodes having a common storage toplogy. zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per node and a separate slot-mapping file. However, zpool_id provides the flexibility of using any device names that show up in /dev/disk/by-path, so it may still be needed on some systems. vdev_id's functionality subsumes that of the sas_switch_id script, and it is unlikely that anyone is using it, so sas_switch_id is removed. Finally, /dev/disk/by-vdev is added to the list of directories that 'zpool import' will scan. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #713
2012-04-21 00:32:30 +00:00
KERNEL=="*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="partition", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}-part%n"
KERNEL=="dm-[0-9]*", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
Add enclosure_symlinks option to vdev_id Add an 'enclosure_symlinks' option to vdev_id.conf. This creates consistently named symlinks to the enclosure devices (/dev/sg*) based off the configuration in vdev_id.conf. The enclosure symlinks show up in /dev/by-enclosure/<prefix>-<channel><num>. The links make it make it easy to run sg_ses on a particular enclosure device. The enclosure links are created in addition to the normal /dev/disk/by-vdev links. 'enclosure_symlinks' is only valid in sas_direct configurations. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Simon Guest <simon.guest@tesujimath.org> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #8194
2018-12-15 01:27:49 +00:00
# Enclosure device symlink rules
ENV{SUBSYSTEM}=="scsi_generic", IMPORT{program}="@udevdir@/vdev_id -e"
ENV{SUBSYSTEM}=="scsi_generic", ENV{ID_ENCLOSURE}=="?*", SYMLINK+="$env{ID_ENCLOSURE_PATH}"